Does anybody have a 265 Hemi 6 (NEW) thermostat housing that I can purchase. Just don't want to wait weeks getiing one from OZ or NZ
Any help would be appreciated. Cheers.
Thermostat housing
Moderator: Moderators
Re: Thermostat housing
i'm sorry i don't
i used my only decent one on the current motor, the rest were mainly white powder, they tend to rot around the end where the pipe goes
what's up with yours.
if it isn't sealing its not usually the housing its the fact that the front of the head aint flat
i ended up with a very thick gasket and loads of silicone
if it has a hole in it drill it out and fit a grub screw.
dave
i used my only decent one on the current motor, the rest were mainly white powder, they tend to rot around the end where the pipe goes
what's up with yours.
if it isn't sealing its not usually the housing its the fact that the front of the head aint flat
i ended up with a very thick gasket and loads of silicone
if it has a hole in it drill it out and fit a grub screw.
dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying