Page 9 of 11

Re: Morgans 68 Charger. Engine #3...

Posted: Fri Jul 19, 19 9:02 pm
by RW71
Forgive me if I've missed you mention it Morgan, but what fuel are you using?

Re: Morgans 68 Charger. Engine #3...

Posted: Fri Jul 19, 19 10:30 pm
by morgan
Stock95 - shell.
You think high comp wants the 98/99?

Re: Morgans 68 Charger. Engine #3...

Posted: Fri Jul 19, 19 11:02 pm
by RW71
Yes, IMHO I think it would be of benefit. :thumbright:

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 1:46 am
by RobTwin
morgan wrote: Fri Jul 19, 19 10:30 pm Stock95 - shell.
You think high comp wants the 98/99?
We use super unleaded and our comp ratio is only 10.2:1. What comp ratio is yours Morgan?

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 9:45 am
by morgan
Well. The things I learn. This morning so far we have -

Learned that the engine is in fact 452ci.
Learned that the compression ratio is 10.85 (eek!)
Learned that the 'rough idle' is because the cam is a Isky292 - "Rough idle" "2800-7000" range !

I told you the power built up in the top end ! :)
Perhaps down the line a *slightly* calmer one would suit.

Hahaha - this is really funny. I suppose I did ask for a more powerful 440. This is that... :lol:

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 11:28 am
by Blue
Sounds perfect, super unleaded it is then. At a rough guess that combo is likely to be putting out around 450- 500hp and a similar amount of torque. A decent carb set up will go a long way to sorting it out and a torque convertor with a bit more stall speed would probably help. With the right gearing that should be a solid 12 second car...

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 12:22 pm
by morgan
2400 stall so slightly low.
I went for ‘warm 440’ type spec...

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 6:12 pm
by morgan
Silly water drip from rear—but-one header bolt.
Wont nip up - stays loose.
Will have to remove, clean head thread and investigate. New posh 1” bolts too...

I might pop a stud in there instead...

Re: Morgans 68 Charger. Engine #3...

Posted: Sat Jul 20, 19 7:57 pm
by Pete
You should silicon all header bolts on Standard Iron heads to prevent leaks.

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 7:34 am
by RobTwin
Harpenden this Weds Morgan - you usually use it to test your cooling system... :-k :lol:

See you there?

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 8:04 am
by morgan
Stud now in. Silicon. Nice new nut going on this morn. It was irritating drip/sizzle.

Rob. Gonna let you down pal. Got tickets but gonna bail on Harpenden. Too crazy and I dont trust it to get in. Last year we sailed in, but you know how it gets... Need to get the idling manners sorted first and that aint gonna happen before weds.
Also, got 'Carfest' on thurs, so a longggg drive ahead of me (which I think she'll be fine for) so spending the time prepping for that.

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 8:51 am
by RobTwin
morgan wrote: Mon Jul 22, 19 8:04 am ....Rob. Gonna let you down pal. Got tickets but gonna bail on Harpenden. Too crazy and I dont trust it to get in. Last year we sailed in, but you know how it gets... Need to get the idling manners sorted first and that aint gonna happen before weds.
Also, got 'Carfest' on thurs, so a longggg drive ahead of me (which I think she'll be fine for) so spending the time prepping for that.
Dont blame you! I expect Carfest will be a good enough test for you... and the car

:working: :D

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 9:43 am
by morgan
RobTwin wrote: Mon Jul 22, 19 8:51 am
Dont blame you! I expect Carfest will be a good enough test for you... and the car

:working: :D
We are both teetering on the edge... :geek:

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 10:58 am
by Dave999
will be you be at the mopar nats?

don't think we have nattered at the nats for a long time

Dave

Re: Morgans 68 Charger. Engine #3...

Posted: Mon Jul 22, 19 11:26 pm
by morgan
I wont be, car might be.
Will have to hit the Ace end of summer riot.