Dave999's Aussie Charger
Moderator: Moderators
Or you could sell your body to the well heeled ladies of Twickers...
"there was a young lady from Twickers..."
sorry, I went off on one there...
And with the huge amount of money you will make, get yourself three 45 DCOE webers and a custom made six branch with a dual exhaust system.
Lovely.
Now that's the way to do it!
"there was a young lady from Twickers..."
sorry, I went off on one there...
And with the huge amount of money you will make, get yourself three 45 DCOE webers and a custom made six branch with a dual exhaust system.
Lovely.
Now that's the way to do it!
try Woolies;gonna have to make a gasket up any tips on what kind of material would be handy
http://www.woolies-trim.co.uk/c-140-graphited.aspx
or;
http://www.usautomotive.co.uk/store/scr ... roduct=166
Last edited by Anonymous on Fri Aug 17, 07 12:37 pm, edited 1 time in total.
well
no whoreing myeslf out just yet....well not completely
found a bloke on the tradeing estate who has a lump of plate he says i can have provided i show him my well turned pins wearing a six inch heal
see the webers would be good......
i've got 2 40s and 4 36s in the garage but they are all down draught and a bit small (scrap yards in italy are great
dellorto weber carburettori written on a bit of paper and they turn up with a box full and sell it to ya for £50.....) My mrs thought i was going to west drayton
anyway i digress
me big whopper is designed for a 4 bbl
i could get one of those 4bbl to 2x IDF adaptors
no whoreing myeslf out just yet....well not completely
found a bloke on the tradeing estate who has a lump of plate he says i can have provided i show him my well turned pins wearing a six inch heal
see the webers would be good......
i've got 2 40s and 4 36s in the garage but they are all down draught and a bit small (scrap yards in italy are great
dellorto weber carburettori written on a bit of paper and they turn up with a box full and sell it to ya for £50.....) My mrs thought i was going to west drayton
anyway i digress
me big whopper is designed for a 4 bbl
i could get one of those 4bbl to 2x IDF adaptors
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
a-ha
I have in my possiesion a plate of purest steel
115mm by 75mm and faced up smooth
all for £2 (well he shouldn't have said a couple of quid should he)
http://www.lentonenginnering.co.uk
handy if you are in watford and need somthing today
nice fellas
shop full of machines and swarf
nice array of callendars grace the walls
decent stock of angle, flat plate in aluminium and steel
few big billets of aluminium brass and other alloys
were doing turbo housings for for bentleys
and some big alloy girdle things for something else automotive
will work from drawings on the back of fag packets if need be, but like a nice blueprint if available
could do axles etc if not too long but are not sure if they can spline the ends for a wide enough range of spline sizes. like one to copy if no drawing avialble
do hardening treatements and good value plateing (presume off site)
tops
my day is made
Dave
I have in my possiesion a plate of purest steel
115mm by 75mm and faced up smooth
all for £2 (well he shouldn't have said a couple of quid should he)
http://www.lentonenginnering.co.uk
handy if you are in watford and need somthing today
nice fellas
shop full of machines and swarf
nice array of callendars grace the walls
decent stock of angle, flat plate in aluminium and steel
few big billets of aluminium brass and other alloys
were doing turbo housings for for bentleys
and some big alloy girdle things for something else automotive
will work from drawings on the back of fag packets if need be, but like a nice blueprint if available
could do axles etc if not too long but are not sure if they can spline the ends for a wide enough range of spline sizes. like one to copy if no drawing avialble
do hardening treatements and good value plateing (presume off site)
tops
my day is made
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
neil wrote:try Woolies;gonna have to make a gasket up any tips on what kind of material would be handy
http://www.woolies-trim.co.uk/c-140-graphited.aspx
or;
http://www.usautomotive.co.uk/store/scr ... roduct=166
now those are two very handy links
Woolies graphite looks like the go
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
one of the first 3
looks good for the hole in the top of the door that the windows goes up n down in
all 3 look better than the rubbish that gets sold as standard replacemnt in OZ
but for the roof line over the door you need the proper made in OZ seal
its a huge thing held on with a big plastic or metal trim
it runs from screen bottom edge all the way back to the back part of your rear side window
Dave
looks good for the hole in the top of the door that the windows goes up n down in
all 3 look better than the rubbish that gets sold as standard replacemnt in OZ
but for the roof line over the door you need the proper made in OZ seal
its a huge thing held on with a big plastic or metal trim
it runs from screen bottom edge all the way back to the back part of your rear side window
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying