Mopar Muscle Association UK

Hi all,

I am refurbing the seats in my 70 Coronet and the plastic front seat backs are looking very war torn. Looks like years of Californian UV has started to break down the top of the seat backs. I have ordered a vinyl/plastic type paint to freshen up the seat parts and backs but was wondering if there was anything i should use to try to harden the brittle seat backs before painting.

Welcome aboard Phil, I would be tempted to treat yourself to some legendary covers, once the vinyl gets hardened by the sun, it's very difficult, if not impossible to get the flexibility back into it.

I don't think anyone does repro seat backs (assuming you mean the hard plastic "shells"), but I think they're probably the same for any bucket seated 70 B body (or E body?) , so good used ones shouldn't be too hard to find.

Any pics of your 70 Coronet?

Cheers Ivor,
I am fitting new seat covers all around, got them off ebag and they ended up coming from China but very pleased with them. It was just the seat backs i had concerns over. The top half are very brittle and you can scratch the plastic quite badly with only your finger nail. I didn`t know if there was anything on the market to harden the plastic before spraying.

Hi Adam!
Its me Phil Blue with silver stripes! Had to start over again with the MMA as i let my membership laps

Hi Phil

Should have realised - can't be that many Phils with 70 Coronets. Maybe see you at Wheels Day?

Will be there Adam as long as the weather Gods are smiling on us
See you there

http://www.yearone.com/serverfiles/fbsh ... &goBtn.y=3