Need to get my hands on a nipple!

Anonymous · Post by **Anonymous** » Mon May 31, 04 12:11 pm

Steve, bit of a long shot but,is it the same size as the one on the top ball joint? if so, I have one.

TrevD · Post by **TrevD** » Mon May 31, 04 8:23 pm

Steve , the nipple you need is " 3/8 UNF " this was standard on many early brittish cars , i thought i had some but sorry i havnt , you should be able to get one from any small old fashiond car shop , or try any mot station that has been around for a while , if you have no luck let me know , i can still get them.

Ivor · Post by **Ivor** » Mon Jun 07, 04 12:42 pm

I'm just about to try Automec in Buckingham, as I've had to saw off all but one brake pipe...apparently they have more nipples than an entire series of Baywatch.

www.automec.co.uk [url]

db · Post by db » Tue Jun 08, 04 9:37 am

Think i have some somewhere if ya stuck i'll try an root em out- Needed one years ago when i had an Aus Charger an as they had to order em in special like they'd only sell me 10 !!