Mopar Muscle Association UK

Posted: **Fri Nov 16, 12 2:01 pm**

Just looked under the car, and was a bit surprised to see my flywheel staring back at me! I guess I'm missing a cover... any ideas where to get one? no idea what's happened to mine

Posted: **Fri Nov 16, 12 2:03 pm**

Just cut some wire mesh to bolt over it. Let some cool air in. But keep rocks out.

Posted: **Fri Nov 16, 12 3:45 pm**

I might have one, or at least I had one, will have look for you.

Posted: **Fri Nov 16, 12 3:46 pm**

mopar_mark wrote:I might have one, or at least I had one, will have look for you.

Cheers!

Posted: **Fri Nov 16, 12 3:53 pm**

If nobody has them we have them in stock too.

Posted: **Fri Nov 16, 12 4:10 pm**

Dave wrote:Just cut some wire mesh to bolt over it. Let some cool air in. But keep rocks out.

thats a good idea

Posted: **Fri Nov 16, 12 4:34 pm**

autofetish wrote:
Dave wrote:Just cut some wire mesh to bolt over it. Let some cool air in. But keep rocks out.
thats a good idea

You do need to shape it the same as the original plate (it's not flat) so that it does not catch the flex plate. But that is easily done.

Posted: **Fri Nov 16, 12 5:13 pm**

I cut a smiley mouth shape in mine and spot welded some mesh to cover it and help cool things down...seems to work a treat....been there for years now

Can post pic tomoz

Posted: **Fri Nov 16, 12 7:32 pm**

I remember Duncan had quite a few of these original cover plates on his stall at the Mopar Nats this year. Tenner a piece if I recall....

Posted: **Fri Nov 16, 12 10:10 pm**

Philth wrote:I remember Duncan had quite a few of these original cover plates on his stall at the Mopar Nats this year. Tenner a piece if I recall....

yep got em all.

Posted: **Fri Nov 16, 12 10:40 pm**

Cannonball wrote:
Philth wrote:I remember Duncan had quite a few of these original cover plates on his stall at the Mopar Nats this year. Tenner a piece if I recall....
yep got em all.

How much for one o' them? I have a 318 with (I think) a 727 trans. The Vin says D34 anyway.

Posted: **Tue Nov 20, 12 10:40 pm**

Sorry I can't find it, if it turns up, I will let you know

Posted: **Tue Nov 20, 12 10:59 pm**

mustangbooks wrote:
Cannonball wrote:
Philth wrote:I remember Duncan had quite a few of these original cover plates on his stall at the Mopar Nats this year. Tenner a piece if I recall....
yep got em all.
How much for one o' them? I have a 318 with (I think) a 727 trans. The Vin says D34 anyway.

i will look for 1 they are different from 727/904

Posted: **Wed Nov 21, 12 12:43 am**

I need to work out what trans I have... I'm sure it was advertised as having a 727.

Posted: **Wed Nov 21, 12 12:50 am**

mustangbooks wrote:I need to work out what trans I have... I'm sure it was advertised as having a 727.

904 is more or less square with a bit of a corner gone 727 weird shape with a bit sticking out under the filler tube area

Mopar Muscle Association UK

Missing cover

Missing cover