Mopar Muscle Association UK

Hello all.

Can anyone point me in the right direction for buying some blank keys (Door/ignition and boot) for my 75 CJ Chrysler?

Thanks in advance.

Andy

https://www.pentastarparts.com.au/store ... list&c=509 But bear in mind my local Timpsons could get Mopar key blanks to order,so it might be worth taking yours to them and checking.

https://www.ebay.com/usr/wolfsecurityha ... noapp=true

I had 3 ignition and three trunk blanks from here, about 15 quid delivered. Local shop then cut all for 6 quid

Pentastar shape for the ignition and the round type with Chrysler Corporation on them for the trunk.

Thanks very much Gents!

your ignition key and door keys are aussie and should be the same key

its a double sided key that originally had a pentastar head

your bootlock/glovebox is the same single sided round head key that all US cars used for their boot lock.

60s pentatsar headed single sided keys used on australian cars up to i think VE don't work.

st some point before your car they swapped from the US ignition keys and locks to Aussie for everything apart from the boot lock


this might work for ignition. then again it might not its the right type but no idea if the swage down the key is in the right place.

http://www.ebay.co.uk/itm/Rootes-Igniti ... SwlXhZYMXA

this type for the bootlock can be had from Uk key cutters branded Silca and appears new old stock on ebay often with a pentastar logo and simca or hillman on it

http://www.ebay.co.uk/itm/NEW-Dodge-Chr ... SwTf9ZSZlW




Dave

Thanks Dave, ignition key worth a try at £4

Yes the eBay ignition key worked a treat. Thanks Dave!

wicked

Dave