Mopar Muscle Association UK

I'm curious about your master cylinder/booster configuration. Is it identical to the set-up from a LHD drive Barracuda? On my RHD Cuda, I had (as built) a separate booster below the battery pan with just the master cylinder attached to the bulkhead. And that was totally different from the LHD master...

Thanks for that, Dave. As usual, you are a mine of useful information!!!!

Without actually taking my carburettor off, how can I tell if my carburettor is a BBS or BBD? The tag got lost decades ago.

Thanks guys for all your interest and especially Dave for a long consideration of the issues. About 30 years ago I considered getting a valuation from Tony O. but for some reason or other, I never actually did. I sent a PM to Pete Wiseman just now but it seems to be stuck in my outbox at the moment....

I think I need to upgrade the insurance value of my RHD Valiant Barracuda. I don't use it much nowadays but it's in reasonable condition. Because it's a straight six, I can't really compare it with the prices I see on this forum for most people's cars! I'm sure its uniqueness doesn't count for much ...

Yes, Dave, I'd already done this. Sadly Rock Auto do washer pumps, the grommet between it and the reservoir, wiper arms, etc but not the plastic reservoir itself! Thanks for your careful analysis of the mechanics of buying/selling. I will re-read and make a decision next week. Many thanks. J

It's been years since I bought stuff on-line from across the Pond, so perhaps somebody could remind me how it all works. I'm after a windshield washer bottle (so therefore a bulky item and probably a "rare" item) which I can get on Ebay (American) or via Year One. Do I buy, then wait to ge...

Hurrah, all sorted. Long-nosed piers wouldn't do it but you gave me a clue! Thanks. Not a spark plug socket, but a box spanner. I suddenly remembered buying some large ancient box spanners from Beaulieu Autojumble many years ago, and I found them today at the back of my workshop. One happened to hav...

I accidentally leant on my windscreen washer bottle and cracked it at the bottom--all the water gushed out. I doubt if the crack is sealable by glue so I need a new bottle. But how do I get the electric pump motor off? The manual says, use a deep socket poked in from the mouth of the bottle. It has ...

Following on from Dave's idea, I ordered a pair of 1/2" X 20 nuts to fit a 3/16" dia pipe. I actually found Car Builder Solutions in this country for this. They fit the new master cylinder OK, ie, screw right down leaving about a millimetre between the nut head and the M/C body. But I have...

Mossy68 wrote: ↑Thu Apr 11, 19 10:08 pm Sounds good.
Could even broaden its content to include South African, Mexican.........etc ?

Yes!

bay4.JPG Does anybody know where in this country one can order brake pipe adapters like the ones in the picture going to the master cylinder? I've looked in vain on-line and my local garage can't get them. The thread going into the master cylinder is 1/2" X 20 UNF and the internal female threa...

I understand now. Thanks guys.

The specs for a Centric master cylinder that might fit my car say that the brake ports are 1/2" 20INV. What on earth does INV mean? Is it TPI (turns per inch) or a fancy name for UNF or UNC?

Can anybody recommend a radiator repairer in the SW London/Surrey area? My radiator (though not leaking yet) needs welding around the seams of the header tank as there's plenty of rust showing. Where I went twenty years ago, Serck's of Dorking, have long gone and the local area is now a desert for s...