Mopar Muscle Association UK

They don't just go around blowing up in ordinary circumstances, though...or burning out in first gear you might have get a problem.

Burn out in second gear
So what you're saying is only do burn outs in second? As in start in second, or get the wheels spinning in first and then change up?

Rob, just a thought, Autometer do gauges in various ohm ranges but most commonly 240-33, did the fuel gauge work when it was wired to the factory clocks? If so I know Chryslers ohm range so it may save me trying to test the gauge or ordering a couple of units through trial and error. No worries if y...

Thanks for the help and getting hold of Terry for me Rob, I appreciate it. From the google searches I've done and the Jaz dealer I've spoken to Auto meter gauges are 240-33ohms and Jaz do sender units for that range, and the gauge did work fine then just stopped at half full (much to my disappointme...

All sorted thanks Terry, I've found a Jaz dealer about 20 miles away from me in Kent. Just got to pull the sender out and check it at the weekend, could be a sticky float if I'm lucky otherwise if alls well with the wiring at least I can get a new sender unit. Out of interest can you remember if the...

Cheers Rob & Terry, it's a jazz fuel cell. That's great, all I needed to know!

Thanks for the quick response Blue. Gauge is aftermarket add on of unknown origin, I know GM gauges are 0-90ohms and Chrysler ones go to 130ohms I think but again, don't know the origin of anything on the car so would be helpful to speak to Terry so at least I'll know the make of manufacturer so can...

Help needed, I've got Terry's old Demon and have a foam filled fuel cell in the boot which as far as I can tell is a 10 gallon unit. My problem is the fuel gauge has just stopped reading anything but half full. Now I assume it's the sender unit but I don't know if it's a tube with float style unit o...

Sorry to briefly hijack your thread but I've been trying to contact cannonball for a couple of weeks. I've emailed you and pm'd you but no reply. Pete said you may be able to help me, I'm looking for a rear tail light lense for a '71/72 Dodge Demon. :help: Sorry, as you were.....back on topic to the...

and this

What about this?

Carl wrote:Welcome friend hope you enjoy your new car.

Hi, thanks Carl. Good to see someone down my end of the country too! Sorry for late reply but work has been manic just lately! I WILL get some pictures up soon, just as soon as I can get a day off or get home before it's dark!!

cant upload pics somthing about file size Go onto Google and look up Photobucket, download it to your phone/computer whatever you use and then if you're attached to the internet Photobucket will automatically copy your photos from that device onto it. You can then upload them onto this site by clic...

yes terry was verey helpfull and rang me and all sorted im a welder fabricator not computer expert i asked for help in stead of slaging me off reply to question would have bin helpfull or pointed me in right place thiss is my first american car let alone mopar all i wanted was some help wich at lea...

Sanitized,,,lol,great car miss it alot Hi Terry, good to hear from you and thanks for posting a few old photos of the car. I've seen the one with the bonnet up in gold before but not seen it in all black and launching of the line. Anything you can tell me about the car, particularly the engine, i.e...

Bye & careful the door doesn't hit you on the way out ... :D :D As said above this club can be very helpful, but you have to have some patience. There is a reasonable amount of traffic throughout the site, but will never be like Wikipedia where answers are instantaneous. Again, I thought Terry ...