Mopar Muscle Association UK

Thanks for the links Scotty,

Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673

Has anyone got any good links for replacement front subframe bushes? Mine resemble swiss cheese & the car wallows in corners worse than any yank I’ve ever owned!

Non A/C cars use different pulleys to A/C cars. You need to use the correct pulleys so the crank, water pump and alternator all line up to use one belt. You can block off and remove the EGR as long as you still have a breather on the valve cover. Looks like I’ll have to shop around for some parts b...

Hi all! Looking for some advice on my EGR amplifier, which looks like it’s been partially blocked off already - see pics. I have some chrome rocker covers to go on the car and they obviously don’t have the fitting for the EGR. Can I bypass or remove this? I’d also like to remove the remainder of my...

The switch just screws in, so there's no real way you can fit it the wrong way round! I guess you could put the connector on the other way round, but as the two outer pins only connect the reverse lights, I'm not sure it would really matter anyway.

Just a quick one. Currently I can only start in neutral, not park. I have tested continuity across the switch to the transmission casing and I get continuity on the centre pin in neutral, but not park and also continuity across the outer pins. My reverse lights also come on when I'm in reverse. Is m...

slumbers wrote: ↑Fri May 03, 19 10:19 am https://www.ebay.co.uk/itm/1-x-Fast-Fix ... SwcnpToC5B

I used a Hi temp spray glue for my Headlining soundproofing something like this

Looks good to me! Thanks for the tip

you are in luck 73 parts book here http://www.mymopar.com/index.php?pid=107 dodge 73 body manual here http://www.mymopar.com/index.php?pid=109 use first to ID parts list use second to see how they go together you will have to manually search both as they are scans not OCR-ed text Dave Brilliant Dav...

ScottyDave wrote: ↑Fri Apr 26, 19 6:02 pm Mine is an SE and iirc has 4bows thats all I can give you as I'm yet to reach the stage of refitting a headliner.

Perhaps all 73s have a four bow liner? It would be nice if that was the case, but Sod's Law probably says otherwise!

My Charger came to me without any remnants of the headlining, including the bows (or any other fittings). I know that either four or six bow liners are fitted, but I have no idea which mine originally had! :-k More confusing is that there appear to be five sets of holes along the upper edge inside t...

Finally got my ‘73 Charger running, only to find that it has a blocked radiator. Can anyone recommend a supplier in the UK where I might be able to get a replacement? Hoses too as I may as well replace the lot

Cannonball wrote: ↑Sat Aug 18, 18 11:24 am I might have that can you measure opposite side ??/

Finally got there! It’s a rubber fitting. About 135mm long, and around 80mm at the widest part at the bottom.

Ok, no problem. Should be able to get up to the barn next weekend. Unfortunately I have limited access to it, due to the times that the owner is there and my work hours

Can anyone help me? I need to find a driver’s side of whatever this plate is on my Charger, it fits just in front of the rear side window. I’ve tried searching ebay, The Paddock and Classic Industries but have had no luck so far. Really hoping to find this, to fill the gaping hole that greets me eve...

ScottyDave wrote: ↑Tue Jul 31, 18 7:19 pm Hello welcome to the club. Looks like a good base to start from
I also have a 73 3rd Gen restoration project which is again slow going due to where its kept

Sounds interesting! I don’t think there’s that many about Any photos?