Mopar Muscle Association UK

Thanks chaps - That has helped a lot, they are all pretty much the same size. There is one freak longer one... When I took it apart 15 of the valves were shimmed..one was not, the freak long one. One thing I have noticed that the rocker shaft have notches, well both notches were at the rear of the e...

Hi All, Did 300 miles in my latest project over easter to find oil leaking on the outside of the block at the head gasket. Its a 68 318, hydraulic tappets. Two of the cylinders were slack on compression anyway so I have taken the heads off. New exhaust valves are on their way, via rock auto so I can...

Love it!

Thanks, the listing says 360 only, I was hoping....

Hi chaps,

Will the 41007 fit a 68 318?

I have a leak at the rear,

Cheers,

Steve

Thanks for the info - good to know I can use the later one.🙂

Hi All Would anybody know where I can locate a neutral -park starting switch for a torque flite 727 auto box. The earlier one with one wire coming out - not the later one with three points. I have tried Summit and Rockauto and the only one I could find was the later one with three points from Summit...

I would say if he is a member on VV, that is his driveway, he was happy to add you on FB and he checks out… its as safe a bet as any. Definitely ask him to scan a copy of the title and bill of sale for you and then post it to the shippers stateside. Spotted the photo on A100 van site FB, looks ace...

Spot on, thanks chaps

Hi all,

Got several old iron Jacks etc... Made by sealey, largest a 3 tonne I think. Work spot on.

I'm Looking for a lighter aluminium one that's easier to move about but that can still jack up the corner of a yank.

Any recommendations?

Cheers,

Cheers Pete,

Evening all,

Ruined one of my lines…

Can I make a new one out of 8mm copper?

I should be able to use the original fittings, I have a flare tool.


Cheers,

Steve

Hi all, I have a very tired power assisted (ram) steering system I took off my old van, it needs new everything! I am attempting to recommission it all and refit to my new van. Anybody reccomend a company to make up the hoses with the correcting fittings? Are the fittings on the back of a small bloc...

Got it (Just about)

- Im not against spending some money, I can buy from america and ship in the back of a vehicle easily.

- Interesting, not one for keep the points.


Keep any thoughts coming,

Thanks guys,

Unfortunately the toilet has gone now….