Mopar Muscle Association UK

Many thanks fellas so if i don't remove the pan completely just lower it i can get at the pump? or if i need to i'm okm chocking teh motor up on either the balancer or the mounts with a nice chocy bit of wood mmmm things are looking up just need the bloody pump to arrive now NATs with decent pressur...

Need to remove the pan off my six to change the oil pump manual paints a picture like this is a simple task to do in your sunday best before you pop off to church. jack up engine remove covers take off pan... i have appraised the situation i.e jacked it up dumped the oil smoked some fags and went ba...

well

if he left at 10:10 last night

he'll be rather parched and on his fifth course of chicken or fish.

shaving ryans privates will have played at least 6 times and there's still 12 hours to go.

may the god of the seat recliner smile on you and curse the bloke in front

Dave

wonder if one of them will fit mine or even better one of them springy ones the blues brothers had

http://www.news.com.au/heraldsun/story/ ... 62,00.html

daft old bugger


dave

14 or 16 Lbs for six and small block i believe

you are ok with an 18 or 20 from halfords

25 is probably too high

Dave

Tis the best way to put a new side on a VW van maaaaasive expanse of flat metal and plenty of scope for warpage

works a treat ive been told although i think a few spot welds are used as well but only on the seams that turn inisde the van and can be welded from the inside with a spot weldy gun


Dave

see told ya i was being a miserable sod




Dave

Ivor wrote: A study by the Institute for Public Policy Research think-tank earlier this year said there are now 1.3 million British emigrants living in Australia.

and only half of them are illegal

Dave

Many thanks john will be in touch yes matt i don't want to strip me gear some hemi 6s used same number of teeth on the pump drive cog and the cam drive i.e they had the same number as the cam drive so the same teeth on each were in mesh all the time some were hunting tooth.i.e they had 1 more tooth ...

dash lights won't dim if somone has wired them direct they should be supplied from the headlight switch variable resitor. but the place on the switch they are supplied from also supplies the interior light the interior light is isnsulated from the inside of the car roof by a bit of cornflake packet ...

Dudes! I don't go 'til Monday!!!! Bit premature aintcha? Or are you trying to tell me something!! Thanks for all the best wishes and encouragement, it means a lot! :thumbright: :thumbright: :thumbright: No but you will be too busy eating curry to go down the library to log on oh yes remeber ya pass...

getting a new (recon one. New ones are $860!!! and have a 6 month waiting list) oil pump. it doesn't come with a gear need to take the gear off the old one and swap it across gear is matched to Cam hence the need to keep the old one now these are (i think the term is either interferance or engineeri...

no is the earth strap from engine to body good (as well as the battery to body) throttle cables sometimes snap because they end up carrying the current back to the body and hence the battery when the engine earth strap gets gnarly and too resistant obviously if the throttle cable was a fat as the ea...

Have a gammon steak before you go....they don't have them over there

Best of luck

it will be much easier than you expect

Dave