Post up your Cars 1/4 mile ET's Combo

Moderator: Moderators

Jack Claw
Posts: 33
Joined: Wed Nov 16, 16 5:06 pm

Post by Jack Claw »

68 Coronet
Full interior and exterior, glass bonnet
440 block with 493 stroker kit, ali heads, mild cam
Stock chassis, highway gears
11.6@115
User avatar
RobTwin
Posts: 13574
Joined: Thu Nov 24, 05 5:05 pm
Location: just north of Watford

Post by RobTwin »

Jack Claw wrote:68 Coronet
Full interior and exterior, glass bonnet
440 block with 493 stroker kit, ali heads, mild cam
Stock chassis, highway gears
11.6@115
Impressive :thumbright:
Image
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

67 Belvedere station wagon
all steel,4150lbs
451ci (400 block,440 crank).625 roller cam,Ported 452 iron heads,Victor intake,950 carb,587hp
727 shifted on column,10"convertor
4.10s and 9"slicks
11.41@117mph
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

67 Belvedere station wagon
all steel 4150 lbs
500ci(400 block,4.150 crank).680 roller cam,indy-1 heads,1150 dominator carb,705 hp
727 column shifted,9.5" convertor
4.10s and 9"slicks
10.57@129mph
Jack Claw
Posts: 33
Joined: Wed Nov 16, 16 5:06 pm

Post by Jack Claw »

DaveB wrote:67 Belvedere station wagon
all steel 4150 lbs
500ci(400 block,4.150 crank).680 roller cam,indy-1 heads,1150 dominator carb,705 hp
727 column shifted,9.5" convertor
4.10s and 9"slicks
10.57@129mph
That's mighty Dave, you be pleased with that?!
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Both were very impressive Dave.

1969 Coronet
493ci Stroker, MP Aluminium Stage VI Heads, .528" Roller cam, cage, 8 3/4" Rear with 3.91:1 gears, Suregrip. 2" TTI Headers, no silencers. No Nitrous.

On MT Drag Radials with 750 Dominator: 11.2 @ 117mph. (effectively in "Street Trim")

On Hoosier Radial Slicks with 1050 Dominator: 11.02 @ 119mph (i.e. NOT a "10")

Frustrating!

I will post up the Challenger figures if it runs this year..........
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

yep,very pleased :thumbright:
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

Same combination as above
10.52@130, 60fts improved from 1.61 to 1.54 with small changes :thumbright:
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

:thumbright: :thumbright: :thumbright:
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
adrianp
Posts: 290
Joined: Thu Apr 12, 12 10:55 am
Location: Bucks

Post by adrianp »

1966 Dodge Charger

All steel, full interior & cage 4150lbs
493ci (440 w/ stroker kit), 440 Source ali heads (not ported)
8 3/4 rear end with 3.91 gears and 28/10/15" slicks

12.69@105mph
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

Can see them ETs coming down,now you have the racing bug Adrian :lol:
challenger
Posts: 881
Joined: Sat May 19, 07 6:03 pm
Location: kingswinford,kidderminster

Post by challenger »

70 challenger 3750llbs with driver
all steel,full interior
440,10.4 comp,555 cam 310 dur
stock eddy heads
m1 intake
850 c&s carb
1 7/8th headers
3.73 gears,manual valve body approx 2000rpm stall 28" tall tyres

11.85 11.87 consistent, 1.6 60ft,s 114mph trap speed
just fitted new 3500 stall verter so will see what that brings. i think putting the driver or car on a diet may just help too !!
keep it mopar !
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

more convertor and gears needed Jim :thumbright:
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

10.42@130 :thumbright:
Jack Claw
Posts: 33
Joined: Wed Nov 16, 16 5:06 pm

Post by Jack Claw »

11.5 @ 117 :thumbright:
Post Reply