Post up your Cars 1/4 mile ET's Combo

Moderator: Moderators

User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

3,900lb with driver

stock suspension,

dana rear 4,56 gears

29.5 / 10.5 /15" tire

1.429 60ft

6.090 116.72 1/8

9.442 146.53 quarter

1st finish ;)
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Les Szabo

Post by Les Szabo »

Thats some 990hp to pull 146 in that weight and 7600rpm with the gears/tyres....

what was in the Motor Dunc?, was it N/A?, size?.....thats some hp even for a Hemi....tell us all.
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

Les Szabo wrote:Thats some 990hp to pull 146 in that weight and 7600rpm with the gears/tyres....

what was in the Motor Dunc?, was it N/A?, size?.....thats some hp even for a Hemi....tell us all.
yes single 1050 domiie,

572 Hemi, pump gas/race fuel mix, 4.5 bore mopar iron block stage v heads independant roucker arm set up,
shame it broke all to soon there was more in it had not even put my tune in it at this point,
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Mick
Posts: 3070
Joined: Sun Apr 18, 04 10:55 pm
Location: Nottingham

Post by Mick »

Be interesting to see how that would have performed in the tube chassis car.
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

Mick wrote:Be interesting to see how that would have performed in the tube chassis car.
what do you think 7.90-8.00 ???
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Les Szabo

Post by Les Szabo »

what did it weigh Dunc
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

Les Szabo wrote:what did it weigh Dunc
2,600 inc me
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Les Szabo

Post by Les Szabo »

Power to Weight Ratio: 2.63
60 Foot E.T. : 1.12
1/8 Mile E.T. : 5.07
1/8 Mile Trap Speed : 134.04
1/4 Mile E.T. : 8.04
1/4 Mile Trap Speed : 167
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

Les Szabo wrote:Power to Weight Ratio: 2.63
60 Foot E.T. : 1.12
1/8 Mile E.T. : 5.07
1/8 Mile Trap Speed : 134.04
1/4 Mile E.T. : 8.04
1/4 Mile Trap Speed : 167
yes i figured around there, yet a b block chevy on methanol would put it firmly in the 7,s never adds up to me,,,,,
www.dwatts80.fsnet.co.uk

WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME

OFTEN OUTNUMBERED NEVER OUTGUNNED,

HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,

I HAVE A NVQW

LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,

THE PASS IS THE JUICE,

LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Is it down to the BBC making more torque than a hemi and improving the 60 foot time?
Pete Wiseman; Cambridge.

Mopar by the grace of God
Mick
Posts: 3070
Joined: Sun Apr 18, 04 10:55 pm
Location: Nottingham

Post by Mick »

Just thought i'd resurrect this thread
70 Challenger, stock weight, full interior, 440, unknown hyd cam, unknown comp, ported stock heads, victor intake with 950 hp holley, reverse pattern 727, 3800 converter 4.10 suregrip 28x10.5 slicks
11.83 at 113mph 1.62 60ft
Mick
"Socialism is the philosophy of failure, the creed of ignorance and the gospel of envy."
Winston Churchill
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Thanks for getting us back on track, Mick:

1968 Plymouth Barracuda
Back halved Race car
2818lbs with Driver.
512ci R/B 4.250 Stroker,
Edelbrock MW CNC ported heads, Erson Roller cam (not that big really)
Victor single Plane inlet, 1050 Dominator,
Super Unleaded with Powerports anti-detonation,
250bhp Shot Nitrous, All in off the line - 2-3 runs per 10lb Bottle.
TTI 2" Headers,
Fully built Transmission, steel drum, etc Trans-brake,
Dana on Ladder bars withs 4.10 Spool,
M/T - 14 x 32 x 15 Slicks,

Best to date:
9.5 at 139mph
1.39 60 foot time.


Would have got faster in Top Sportsman, but SOMEONE forgot to arm the Nitrous.

Not sure where to go next as everything is set to "11"........
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
DaveB
Posts: 2173
Joined: Sun Apr 18, 04 11:22 pm
Location: Thorne,Donny
Contact:

Post by DaveB »

66 coronet
440,iron heads,flat tappet cam,750 carb,dynoed 485hp
glass bumpers and hood,full interior and roll bar
3500 convertor,4.10s,28"slicks,S/S springs
weight 3750 with driver(guess)
11.75@113mph
User avatar
RobTwin
Posts: 13574
Joined: Thu Nov 24, 05 5:05 pm
Location: just north of Watford

Post by RobTwin »

DaveB wrote:66 coronet
440,iron heads,flat tappet cam,750 carb,dynoed 485hp
glass bumpers and hood,full interior and roll bar
3500 convertor,4.10s,28"slicks,S/S springs
weight 3750 with driver(guess)
11.75@113mph
That's an impressive et/mph Dave, for that engine spec :salute: 8-)
Image
User avatar
hemi472
Posts: 512
Joined: Mon Dec 08, 08 4:36 pm

Post by hemi472 »

1969 Camaro
540ci 9.0-1 comp. solid roller , all iron motor, 1000cfm 4150, old school edelbrock c427 dual plane intake , factory style 3/8" fuel system with mechanical stock looking pump, TH400 Trans /3000stall convertor all steel car full interior , Dana 60 with 3.54 , 1/4 - 10.6 @ 124mph - on regular unleaded , weight maybe 3600 with driver .
Post Reply