A mate is chasing a decent tailshaft housing for a Borg Warner 35 trans. In a VJ Charger with a 265. Probably like rocking horse Bananarama! in the UK but, you don't know if you don't ask!
Cheers, Andy
BW35 tailshaft housing
Moderator: Moderators
BW35 tailshaft housing
CJ Chrysler 360
Re: BW35 tailshaft housing
Probably should have written 'sh#t' to avoid the bananarama!
CJ Chrysler 360
Re: BW35 tailshaft housing
ah for tony
i owned a bw35 once but sold it.
think he is limited to 6 cylinder VG onward cars
other option is to get a slant 904, cut a section from the bell housing from it and the BW35 and weld in the BW35 starter part in in the right place
run the 904 converter.
potentially cheaper to get one from Oz
https://www.ebay.com.au/itm/Valiant-CL- ... SwTnpfvTv2
otherwise asking these fellas has helped me before
https://www.austtrans.com/contact-us.aspx
expect $100-200 for a blasted cleaned checked housing
Dave
i owned a bw35 once but sold it.
think he is limited to 6 cylinder VG onward cars
other option is to get a slant 904, cut a section from the bell housing from it and the BW35 and weld in the BW35 starter part in in the right place
run the 904 converter.
potentially cheaper to get one from Oz
https://www.ebay.com.au/itm/Valiant-CL- ... SwTnpfvTv2
otherwise asking these fellas has helped me before
https://www.austtrans.com/contact-us.aspx
expect $100-200 for a blasted cleaned checked housing
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
Re: BW35 tailshaft housing
Thanks very much Dave
I'll forward this to Tony!
Cheers, Andy
I'll forward this to Tony!
Cheers, Andy
CJ Chrysler 360