A bit to do

Use this forum for all your builds in progress.

Moderator: Moderators

User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

A bit of progress:
Balljoint replaced

New Core plug fitted

Had the sump off and checked the bearings, all good :D so sump back on and ready to go.

Rose joints I the shock fitted

Still waiting for the steering rack to arrive and then we can get it back on its wheels.
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

That is not too heavy so far - did the water pump buy the farm?

Glad you are making progress.
Pete Wiseman; Cambridge.

Mopar by the grace of God
sublimemike
Posts: 765
Joined: Sat Jan 08, 11 6:53 pm
Location: oxford - the dreaming spires where cars in the city are banned

Post by sublimemike »

Hope it all gets back together soon Jon without too much pain on the wallet. It could have been so much worse. Dale is close to me if I can be of any help.
if you think speed kills don't get on a plane
User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

Sorry Pete, missed that.

New water pump now fitted, Headers back on, plugs in just need oil and water and it is ready to fire up.
User avatar
octanejunkie
Posts: 399
Joined: Thu Dec 04, 14 3:03 pm
Location: Somerset

Post by octanejunkie »

Ouch. Nasty, but lucky at the same time. Bet yer bumhole had a bit of a twitch when you spun out.
8-[

Glad you were safe and sound.
"If its a job no man can survive, he's the man for the job"
User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

All the pieces are slowly coming together.
The steering rack and front wheel are now here so it should be back on its wheels and ready to fire up and check the motor out in the next couple of weeks.
Attachments
IMG_20161201_140335.jpg
IMG_20161201_140335.jpg (174.79 KiB) Viewed 1522 times
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Post by Pete »

Thanks for keeping us all updated, I am glad its coming together relatively easily.
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

Nigel has been to the workshop today and fitted the steering rack and shocks. Just need to replace the broken bleed nipple on the caliper and the car is ready to go back on its wheels.
While he was there he finished fitting the new clips to the boot lid
Attachments
IMG-20161214-WA000.jpg
IMG-20161214-WA000.jpg (32.56 KiB) Viewed 1482 times
User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

Nearly back on the floor
Attachments
IMG-20161214-WA001.jpg
IMG-20161214-WA001.jpg (213.56 KiB) Viewed 1475 times
User avatar
Turnip
Posts: 988
Joined: Fri Jan 26, 07 4:40 pm
Location: kent
Contact:

Post by Turnip »

Nigel has been at it again today. Finished off fitting the new fuel pump and tidying up the fuel lines and fitting a new trans catch can
Attachments
IMG-20170104-WA000.jpg
IMG-20170104-WA000.jpg (62.79 KiB) Viewed 1436 times
GJUK
Posts: 2486
Joined: Mon Oct 28, 13 5:03 pm

Post by GJUK »

\o/

Looking good. Well done :)
Post Reply