QA1 UCA fitment guidance

Moderator: Moderators

Post Reply
MilesnMiles
Posts: 7220
Joined: Fri Nov 04, 05 8:40 pm
Location: Cornwall

QA1 UCA fitment guidance

Post by MilesnMiles »

Hi team, got a set of QA1 UCAs to fit to my Barracuda. They come with advertised extra camber, castor angles and I’m wondering if anyone who’s fitted these has advice on what adjustment on the cam bolts I should have?
In the past I set mine up with the usual, have the front bolts allowing the UCA as far out as possible and the rear bolt the opposite. Always put me in the ball park, but with these arms having extra degrees built in, wondering on best approach.
User avatar
Blue
Posts: 13227
Joined: Sun Apr 18, 04 11:29 pm
Location: Hertford, England, where the streets are paved with, erm, asphalt.....

Re: QA1 UCA fitment guidance

Post by Blue »

Same procedure as the stock arms, you will achieve more caster when it's set up.
"Jesus died for somebody's sins but not mine"
MilesnMiles
Posts: 7220
Joined: Fri Nov 04, 05 8:40 pm
Location: Cornwall

Re: QA1 UCA fitment guidance

Post by MilesnMiles »

Right on, cheers.
Post Reply