Lowering the 2015 challenger

Moderator: Moderators

Post Reply
Brucecam1
Posts: 1
Joined: Sun Dec 08, 19 9:10 pm
Location: Kent

Lowering the 2015 challenger

Post by Brucecam1 »

Hi i am new to the mopar club. I have a 2015 Challenger, It rides about 3 inches above the wheel, i want to lower it to about an inch or so above/ can anyone recommend the right springs to get to get the right stance. Its a 5.7 litre R/T
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Re: Lowering the 2015 challenger

Post by Pete »

Hi there, and welcome to the club.

Unless you can get info off an American Forum where it is more likely they will have done that modification, the only way is to work out the current ride height and the current spring rate. This is done over a range of compression and length by a specialised company.

They can then wind springs with the correct poundage at the appropriate compression rate.

Drop me a PM if you wish to discuss more.

Thanks

Pete
Pete Wiseman; Cambridge.

Mopar by the grace of God
Post Reply