73 Charger Front subframe mounts/bushes
Moderator: Moderators
73 Charger Front subframe mounts/bushes
Has anyone got any good links for replacement front subframe bushes? Mine resemble swiss cheese & the car wallows in corners worse than any yank I’ve ever owned!
- ScottyDave
- Posts: 1614
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
Re: 73 Charger Front subframe mounts/bushes
Here you go
https://www.rockauto.com/en/catalog/dod ... 79456,body
you can also get poly bushes for the torsion bar Xmbr as well,
https://www.rockauto.com/en/catalog/dod ... hing,10419
https://www.rockauto.com/en/catalog/dod ... 79456,body
you can also get poly bushes for the torsion bar Xmbr as well,
https://www.rockauto.com/en/catalog/dod ... hing,10419
73 Charger 318
MMA-130
MMA-130
Re: 73 Charger Front subframe mounts/bushes
Thanks for the links Scotty,
Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673
Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673
Re: 73 Charger Front subframe mounts/bushes
Yes you need those and the torsion bar crossmember bushes to sort out the front mounts. The back axle it also on horrible rubber insulators for added slop....
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
- ScottyDave
- Posts: 1614
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
Re: 73 Charger Front subframe mounts/bushes
RAGNAR wrote: ↑Thu Jul 16, 20 4:02 pm Thanks for the links Scotty,
Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673
Yes that's the one's I'd replace the torsion bar Xmbr bushes as well.
Firmfeel do the option of a solid alloy mount.
As Blue says the rear leaf springs are encased in rubber as well, have a look here.
https://www.rockauto.com/en/catalog/dod ... ator,13637
73 Charger 318
MMA-130
MMA-130
Re: 73 Charger Front subframe mounts/bushes
When I did some work on a mates '73 years ago, we replaced all the front insulators with ally spacers and I modded the rear to get shot of the insulators on the axle.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
- ScottyDave
- Posts: 1614
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
Re: 73 Charger Front subframe mounts/bushes
That's the route I've gone down as I had to replace my rear springs anyway. I've got the poly bushes for K frame and torsion xmbr.
73 Charger 318
MMA-130
MMA-130