‘oles

Moderator: Moderators

Post Reply
User avatar
Stu
Posts: 6886
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

‘oles

Post by Stu »

With everything else to do on the car, hadn’t got round to some obvious stuff like checking to trunk floor, until I had to mop it out on Sunday evening.

Two things are obvious....

1. Someone in the past had an 1 1/2” hole saw and weren’t afraid to use it, though why escapes me.
2. I’m pretty sure there’s supposed to be a plate around where the tank filler neck disappears through the floor, isn’t there? :-k

Blanking grommets on order as a temporary fix, but anyone able to share a picture of what the filler neck plate should look like, if indeed there is one? I’m clearly not using the right terminology on Google searches.

Ta.
Attachments
12D079DB-3E15-48BF-BBF3-A7216980187C.jpeg
12D079DB-3E15-48BF-BBF3-A7216980187C.jpeg (179.04 KiB) Viewed 3420 times
AB0EE6BC-9E19-4BA3-ABE1-4FE5870AFE79.jpeg
AB0EE6BC-9E19-4BA3-ABE1-4FE5870AFE79.jpeg (199.69 KiB) Viewed 3420 times
C151E4C7-6FD9-4830-BE77-1557FEBE680B.jpeg
C151E4C7-6FD9-4830-BE77-1557FEBE680B.jpeg (166.64 KiB) Viewed 3420 times
74796580-2F1C-4073-822E-BD3CADCB4E86.jpeg
74796580-2F1C-4073-822E-BD3CADCB4E86.jpeg (192.94 KiB) Viewed 3420 times
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
User avatar
Blue
Posts: 14164
Joined: Sun Apr 18, 04 11:29 pm
Location: Straight outta Royston

Re: ‘oles

Post by Blue »

Classic industries ME8314 for the fuel neck to floor seal.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
User avatar
Stu
Posts: 6886
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

Re: ‘oles

Post by Stu »

Fans testicles, thank you. 8-)
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
User avatar
Dave999
Posts: 9427
Joined: Thu Feb 24, 05 10:31 am
Location: Twickenham,London, England

Re: ‘oles

Post by Dave999 »

holes

in my mind only reason for cutting holes in the back end of a car is to perhaps fit a non standard tow bar. Mopar bars, and bolt head access is ok
home made or aftermarket a nice hole to stick your socket extension through might be necessary.

did it ever have LPG fitted?

Mind they could just be for playing pee-po you never know.


Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
User avatar
Blue
Posts: 14164
Joined: Sun Apr 18, 04 11:29 pm
Location: Straight outta Royston

Re: ‘oles

Post by Blue »

Clean the area up then cut some circles of thin ally sheet and glue them on from the top with Tigerseal. Thats a perfectly acceptable solution and it will keep spray from the tyres out of the boot.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
User avatar
Stu
Posts: 6886
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

Re: ‘oles

Post by Stu »

8-) :thumbright:
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
Goblinking
Posts: 71
Joined: Wed Aug 12, 20 2:19 am

Re: ‘oles

Post by Goblinking »

Looks like uncle tony has been at it.
User avatar
Stu
Posts: 6886
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

Re: ‘oles

Post by Stu »

You’ve lost me there :scratch:
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
User avatar
mopar_mark
Posts: 6707
Joined: Fri Jul 14, 06 8:01 pm
Location: Windlesham, Surrey

Re: ‘oles

Post by mopar_mark »

Stu wrote: Thu Aug 19, 21 10:15 am You’ve lost me there :scratch:
Tony O…
"I spent a lot of money on booze, birds and fast cars. The rest I just squandered."
User avatar
Stu
Posts: 6886
Joined: Sun Jul 31, 05 4:15 pm
Location: Shropshire, home of the worlds smallest big screen TV

Re: ‘oles

Post by Stu »

I wondered, but thought I was missing something.
24 hours in a day, 24 beers in a case. Coincidence? I think not…

70 Challenger
MMA/489
NSS/435
Post Reply