Page 1 of 1
Help with headers please
Posted: Tue Aug 30, 22 9:02 am
by TIB3300
Good morning All!
Am after some advice please
For next year I want to buy some shiny headers
I only have limited space, the cast oem's fit great, but wanted something more bling
After looking around, they seem to be called shortie block huggers with a 2 1/2in out.
My question is who makes some shortie headers that fit properly and come out from the block the least? I have found a few, but cant find any dimensions, also can anyone recommend good fitting ones ?
AND !
Stainless steel?
Chrome ?
Ceramic coated?
Thanks
Re: Help with headers please
Posted: Mon Sep 05, 22 3:50 pm
by Dave999
whole range here
https://www.caeperformanceproducts.com. ... s=CHRYSLER
all designed in 1 way or another to squeeze into a RHD chrylser
NOT cheap.
Dave
Re: Help with headers please
Posted: Wed Sep 21, 22 7:22 am
by TIB3300
Thank you will give them a look
Re: Help with headers please
Posted: Wed Sep 21, 22 7:42 pm
by Stu
I may still have a set of Hedman block huggers that haven’t been fitted, if they fit your bill? Doubt they will be shiny, but have been stored in the box I got them in for the last few years. Can check and have a think on a price if you are interested.
Re: Help with headers please
Posted: Sat Sep 24, 22 5:41 pm
by TIB3300
Stu wrote: ↑Wed Sep 21, 22 7:42 pm
I may still have a set of Hedman block huggers that haven’t been fitted, if they fit your bill? Doubt they will be shiny, but have been stored in the box I got them in for the last few years. Can check and have a think on a price if you are interested.
hiya Stu
were they chrome or ceramic coated ?
Re: Help with headers please
Posted: Sun Sep 25, 22 7:39 am
by Stu
Ceramic
Re: Help with headers please
Posted: Tue Sep 27, 22 7:13 am
by TIB3300
Stu wrote: ↑Sun Sep 25, 22 7:39 amCeramic
Sorry black or silver ?
Oh! and before I have you digging around taking pictures . What are you wanting for them Sir?
Re: Help with headers please
Posted: Tue Sep 27, 22 10:44 am
by Stu
Black
I’d rather dig them out and check they’re all good first, but will have a think on price.
Re: Help with headers please
Posted: Tue Sep 27, 22 10:57 am
by TIB3300
Stu wrote: ↑Tue Sep 27, 22 10:44 am
Black
I’d rather dig them out and check they’re all good first, but will have a think on price.
I did want ceramic silver, but I could get them redone in silver
If you could have a look please.
Not saying I want them as still need to know how far they come out from the block ?
Re: Help with headers please
Posted: Tue Sep 27, 22 11:10 am
by Stu
Not a problem, will send some photos and go from there.
Re: Help with headers please
Posted: Tue Sep 27, 22 11:24 am
by TIB3300
Stu wrote: ↑Tue Sep 27, 22 11:10 am
Not a problem, will send some photos and go from there.
Thank you
Re: Help with headers please
Posted: Thu Oct 13, 22 8:48 pm
by Stu
Not forgotten, had an injury so not had chance to go dig them out yet. Bear with me.
Re: Help with headers please
Posted: Fri Oct 14, 22 8:27 pm
by TIB3300
Stu wrote: ↑Thu Oct 13, 22 8:48 pm
Not forgotten, had an injury so not had chance to go dig them out yet. Bear with me.
No probbs Stu, Just hold off for the mo please, Am looking at stainless steel now. As I can alter them without loosing the Finnish