information
Moderator: Moderators
-
- Posts: 153
- Joined: Mon Oct 11, 04 9:17 pm
- Location: linton,cambridge
information
hi all,working on a 1973 charger,replacing all the brake pipes,just want to make sure about 2 of the pipes,these are the 2 which come out of the brake master cylinder,and go in to the top of the proportion valve.has any one got a pic of these 2 brake pipes,?its got a brake servo and front discs,thanks
- ScottyDave
- Posts: 1614
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
Re: information
Hopefully these are some use to you, 73 Charger with front discs.
Cheers Dave
Cheers Dave
- Attachments
-
- WP_20160827_13_57_55_Pro.jpg (123.68 KiB) Viewed 959 times
-
- WP_20160827_13_57_24_Pro.jpg (97.55 KiB) Viewed 959 times
-
- WP_20160827_13_58_12_Pro.jpg (131.42 KiB) Viewed 959 times
73 Charger 318
MMA-130
MMA-130
-
- Posts: 153
- Joined: Mon Oct 11, 04 9:17 pm
- Location: linton,cambridge
Re: information
thanks dave,will be doing this job,in the morning,just got to bench bleed the brake master cylinder,
- ScottyDave
- Posts: 1614
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
Re: information
73 Charger 318
MMA-130
MMA-130
Re: information
remember that the ports on the master cylinder have chrysler specific and different sized threads
you need the correct pipe end for the hole.
most chrysler brake pipe ends have no lead before the thread but the ones on the master cylinder might
they also do different sizes on the brake bias so that you can't plumb it the wrong way
AutoMec and Namrick are two UK companies that do all of the sizes with no lead to the thread but they won't know what you need for a US car
Dave
you need the correct pipe end for the hole.
most chrysler brake pipe ends have no lead before the thread but the ones on the master cylinder might
they also do different sizes on the brake bias so that you can't plumb it the wrong way
AutoMec and Namrick are two UK companies that do all of the sizes with no lead to the thread but they won't know what you need for a US car
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
-
- Posts: 153
- Joined: Mon Oct 11, 04 9:17 pm
- Location: linton,cambridge
Re: information
thanks dave,have been working on it all day,i did bench bleed the master cylinder first,have got the rear brakes done,but it took a lot of time to bleed the back brakes,only got to do the front,s now,