Small block manual Clutch help

Moderator: Moderators

User avatar
Dave999
Posts: 9427
Joined: Thu Feb 24, 05 10:31 am
Location: Twickenham,London, England

Re: Small block manual Clutch help

Post by Dave999 »

Mm will be for a 3 speed manual made by newprocess or chrysler...
the chances are low that the size and spline matches you never know...but id guess no.

chrysler did use a Borg Warner t10 for about 6 months in early 60s, no idea if the spline was the same as the T5....i don't think it was
newprocess looked at the t10 and said we can do better than that and come up with the A833

just like the 23 spline plates for Aussie chryslers and UK ford are just different enough not to work...

Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
User avatar
TIB3300
Posts: 608
Joined: Wed Oct 25, 17 10:14 am
Location: Sheffield

Re: Small block manual Clutch help

Post by TIB3300 »

Again thanks Dave. I think I will just stick to the Ford plate and dodge pressure plate :thumbright:
User avatar
TIB3300
Posts: 608
Joined: Wed Oct 25, 17 10:14 am
Location: Sheffield

Re: Small block manual Clutch help

Post by TIB3300 »

Ok I need a 10.5 clutch,
Doe's anyone have a 10.5 pressure plate at home in garage, they could give me a dimension please

Am looking for the inner dimension of a 10.5 pessure plate :read2:
Attachments
clutch.jpg
clutch.jpg (81.28 KiB) Viewed 1553 times
User avatar
TIB3300
Posts: 608
Joined: Wed Oct 25, 17 10:14 am
Location: Sheffield

Re: Small block manual Clutch help

Post by TIB3300 »

I know I have posted this info in my build but just incase someone wants it ay a later date

All from rock autos
All bolted to 10.5 Dodge flywheel

Dodge MU16751G {#90314}
10-1/2" Clutch; Diaphragm Style

1999 V8 Mustang 381021 10-1/2" X 1-1/16" X 10T
Attachments
IMG_20200327_155323744.jpg
IMG_20200327_155323744.jpg (106.93 KiB) Viewed 1537 times
User avatar
Dave999
Posts: 9427
Joined: Thu Feb 24, 05 10:31 am
Location: Twickenham,London, England

Re: Small block manual Clutch help

Post by Dave999 »

you have about the same amount of meat around the cover plate bolts as i do with a 10 inch holden v8 clutch on a flywheel designed for a 9.5 inch aussie mopar clutch

its worked fine for me..although derek was heard to say how the hell do you drive that in traffic, the weight of that clutch is horrible....

you get used to it....

i have one grotesquely muscular leg, with a huge buttock at the top that i polish up with false tan
and a pale straw dangling from a dainty boiled egg on the other side

spend my life walking in circles.... :D

Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
User avatar
Pete
Posts: 21944
Joined: Sun Apr 18, 04 10:49 pm
Location: MMA Chairman

Re: Small block manual Clutch help

Post by Pete »

TIB3300 wrote: Tue Mar 31, 20 8:03 am I know I have posted this info in my build but just incase someone wants it ay a later date

All from rock autos
All bolted to 10.5 Dodge flywheel

Dodge MU16751G {#90314}
10-1/2" Clutch; Diaphragm Style

1999 V8 Mustang 381021 10-1/2" X 1-1/16" X 10T
I assume you have now got this all sorted and installed?
Well done for your perseverance.
Pete Wiseman; Cambridge.

Mopar by the grace of God
User avatar
TIB3300
Posts: 608
Joined: Wed Oct 25, 17 10:14 am
Location: Sheffield

Re: Small block manual Clutch help

Post by TIB3300 »

Dave999 wrote: Wed Apr 15, 20 3:56 pm you have about the same amount of meat around the cover plate bolts as i do with a 10 inch holden v8 clutch on a flywheel designed for a 9.5 inch aussie mopar clutch

its worked fine for me..although derek was heard to say how the hell do you drive that in traffic, the weight of that clutch is horrible....

you get used to it....

i have one grotesquely muscular leg, with a huge buttock at the top that i polish up with false tan
and a pale straw dangling from a dainty boiled egg on the other side


spend my life walking in circles.... :D

Dave
:lol:
User avatar
TIB3300
Posts: 608
Joined: Wed Oct 25, 17 10:14 am
Location: Sheffield

Re: Small block manual Clutch help

Post by TIB3300 »

Pete wrote: Wed Apr 15, 20 8:18 pm
TIB3300 wrote: Tue Mar 31, 20 8:03 am I know I have posted this info in my build but just incase someone wants it ay a later date

All from rock autos
All bolted to 10.5 Dodge flywheel

Dodge MU16751G {#90314}
10-1/2" Clutch; Diaphragm Style

1999 V8 Mustang 381021 10-1/2" X 1-1/16" X 10T
I assume you have now got this all sorted and installed?
Well done for your perseverance.
Thanks

No!, am on with fitting the engine at the moment

I am known for my tenacity , well I think thats what you call it ? :banghead:
Post Reply