information

Moderator: Moderators

Post Reply
three counties
Posts: 153
Joined: Mon Oct 11, 04 9:17 pm
Location: linton,cambridge

information

Post by three counties »

hi all,working on a 1973 charger,replacing all the brake pipes,just want to make sure about 2 of the pipes,these are the 2 which come out of the brake master cylinder,and go in to the top of the proportion valve.has any one got a pic of these 2 brake pipes,?its got a brake servo and front discs,thanks
User avatar
ScottyDave
Posts: 1614
Joined: Sun Mar 08, 15 9:38 pm
Location: Dave Evans: MMA 130, Worcestershire

Re: information

Post by ScottyDave »

Hopefully these are some use to you, 73 Charger with front discs.

Cheers Dave
Attachments
WP_20160827_13_57_55_Pro.jpg
WP_20160827_13_57_55_Pro.jpg (123.68 KiB) Viewed 957 times
WP_20160827_13_57_24_Pro.jpg
WP_20160827_13_57_24_Pro.jpg (97.55 KiB) Viewed 957 times
WP_20160827_13_58_12_Pro.jpg
WP_20160827_13_58_12_Pro.jpg (131.42 KiB) Viewed 957 times
73 Charger 318
MMA-130
three counties
Posts: 153
Joined: Mon Oct 11, 04 9:17 pm
Location: linton,cambridge

Re: information

Post by three counties »

thanks dave,will be doing this job,in the morning,just got to bench bleed the brake master cylinder, :)
User avatar
ScottyDave
Posts: 1614
Joined: Sun Mar 08, 15 9:38 pm
Location: Dave Evans: MMA 130, Worcestershire

Re: information

Post by ScottyDave »

:thumbright:
73 Charger 318
MMA-130
User avatar
Dave999
Posts: 9427
Joined: Thu Feb 24, 05 10:31 am
Location: Twickenham,London, England

Re: information

Post by Dave999 »

remember that the ports on the master cylinder have chrysler specific and different sized threads

you need the correct pipe end for the hole.

most chrysler brake pipe ends have no lead before the thread but the ones on the master cylinder might

they also do different sizes on the brake bias so that you can't plumb it the wrong way

AutoMec and Namrick are two UK companies that do all of the sizes with no lead to the thread but they won't know what you need for a US car

Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
three counties
Posts: 153
Joined: Mon Oct 11, 04 9:17 pm
Location: linton,cambridge

Re: information

Post by three counties »

thanks dave,have been working on it all day,i did bench bleed the master cylinder first,have got the rear brakes done,but it took a lot of time to bleed the back brakes,only got to do the front,s now,
Post Reply