Foam gaskets

Stu · Post by **Stu** » Mon May 30, 22 8:22 pm

Before I pay a million squids to get fresh ones imported, the taillight clusters on my car have what looks like high density foam gaskets between the units and the body.

Doesn’t look rocket science to cut, if I can find some suitable sheet. Internet searches flag up a gazillion options.

Anyone any idea exactly what it is I’m looking for and where I can buy a sheet big enough?

TIA as ever.

Blue · Post by **Blue** » Mon May 30, 22 8:33 pm

2mm sponge rubber sheet off eBay would do the trick I reckon.

Stu · Post by **Stu** » Mon May 30, 22 9:27 pm

Sponge rubber sheet sounds promising, but definitely more than 2mm. I’ll measure up tomorrow, but I reckon 5-6mm.

Stu · Post by **Stu** » Mon May 30, 22 10:09 pm

Blimey, that’s a damn sight cheaper than getting the real thing!

Excellent stuff, thanks Blue!

Stu · Post by **Stu** » Tue May 31, 22 9:29 pm

Nearly half inch thick!

Steve · Post by **Steve** » Wed Jul 13, 22 3:07 pm

I've used DMT before if you get stuck. Very good

https://www.detroitmuscletechnologies.c ... YYQAvD_BwE

Stu · Post by **Stu** » Wed Jul 13, 22 4:23 pm

Thanks Steve, appreciate the link and will bank it for future use, but sorted now.

Steve · Post by **Steve** » Wed Jul 13, 22 8:14 pm

Very welcome Stu, mind your fingers!!!!

Stu · Post by **Stu** » Wed Jul 13, 22 8:47 pm

You’ve lost me there, Steve…

Steve · Post by **Steve** » Wed Jul 13, 22 9:53 pm

You will need a sharp blade to cut out the gaskets and if you are anything like me, mind your fingers

Stu · Post by **Stu** » Wed Jul 13, 22 11:12 pm

Ah, gotcha.

No cutting needed, ordered the correct gaskets in the end.

Steve · Post by **Steve** » Wed Jul 13, 22 11:31 pm

Excellent....have fun fitting them , cheers

Stu · Post by **Stu** » Thu Jul 14, 22 1:32 pm

FFS, just went to check the link you sent and it’s exactly where I got them from.

Cheers Steve.

Steve · Post by **Steve** » Thu Jul 14, 22 4:39 pm

From memory, a good guy to deal with. Looks like his business has taken off. When I ordered rear tail light gaskets for my Fury the guy was laser cutting them in his spare time from originals used as patterns. Good company to have in the contact list.

Cheers Steve

Mopar Muscle Association UK

Foam gaskets

Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets

Re: Foam gaskets