75 dart wiper linkage

Moderator: Moderators

Post Reply
redneck 75
Posts: 6
Joined: Sat Oct 24, 20 3:57 pm

75 dart wiper linkage

Post by redneck 75 »

i fitted new plastic bushings on my wiper linkage arm,put a small hole in the back and put them in boiling water to get them on linkage arm and greased them.But getting them to fit and connect onto wiper pivot mechanism under dash is causing big headache.They are too tight to press on as the plastic bushings are not pliable at all.Theres not much room to get my pipe grips in either.Any help and advice would be great,thanks jon
Challenger007
Posts: 31
Joined: Tue Dec 22, 20 4:04 pm

Re: 75 dart wiper linkage

Post by Challenger007 »

Do you have a set of sockets? A very useful thing when disassembling a car and during repairs. I purchased the Craftsman Mechanic's Tool Set. Of course, I laid out a tidy sum, but a set of tools for any occasion. If you are interested, then here https://homemakerguide.com/best-socket-set/ there is a description of this set.
Post Reply