as the title suggests, i need to remove the bumpers for paint. The rear seems pretty simple and self explanatory. However, the front seems a lot more complex. I've looked around the net, and haven't found anything very helpful. The workshop manual is also not very helpful, with very few words on the subject, and a pretty rubbish diagram...
Please help, as i don't want to break/ruin anything.
3rd gen charger bumper removal
Moderator: Moderators
- octanejunkie
- Posts: 399
- Joined: Thu Dec 04, 14 3:03 pm
- Location: Somerset
3rd gen charger bumper removal
"If its a job no man can survive, he's the man for the job"
I've taken a set off but it was donkeys years ago. It's just a case of having a look at it, it should be pretty obvious what you need to remove, these are not complicated cars. One warning though, these bumpers are heavy be prepared for that. I very much doubt you will be able to just remove the chrome part, you will need to remove the whole assembly and strip it on the floor I reckon.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”