Post up your Cars 1/4 mile ET's Combo
Moderator: Moderators
Both were very impressive Dave.
1969 Coronet
493ci Stroker, MP Aluminium Stage VI Heads, .528" Roller cam, cage, 8 3/4" Rear with 3.91:1 gears, Suregrip. 2" TTI Headers, no silencers. No Nitrous.
On MT Drag Radials with 750 Dominator: 11.2 @ 117mph. (effectively in "Street Trim")
On Hoosier Radial Slicks with 1050 Dominator: 11.02 @ 119mph (i.e. NOT a "10")
Frustrating!
I will post up the Challenger figures if it runs this year..........
1969 Coronet
493ci Stroker, MP Aluminium Stage VI Heads, .528" Roller cam, cage, 8 3/4" Rear with 3.91:1 gears, Suregrip. 2" TTI Headers, no silencers. No Nitrous.
On MT Drag Radials with 750 Dominator: 11.2 @ 117mph. (effectively in "Street Trim")
On Hoosier Radial Slicks with 1050 Dominator: 11.02 @ 119mph (i.e. NOT a "10")
Frustrating!
I will post up the Challenger figures if it runs this year..........
Pete Wiseman; Cambridge.
Mopar by the grace of God
Mopar by the grace of God
-
- Posts: 881
- Joined: Sat May 19, 07 6:03 pm
- Location: kingswinford,kidderminster
70 challenger 3750llbs with driver
all steel,full interior
440,10.4 comp,555 cam 310 dur
stock eddy heads
m1 intake
850 c&s carb
1 7/8th headers
3.73 gears,manual valve body approx 2000rpm stall 28" tall tyres
11.85 11.87 consistent, 1.6 60ft,s 114mph trap speed
just fitted new 3500 stall verter so will see what that brings. i think putting the driver or car on a diet may just help too !!
all steel,full interior
440,10.4 comp,555 cam 310 dur
stock eddy heads
m1 intake
850 c&s carb
1 7/8th headers
3.73 gears,manual valve body approx 2000rpm stall 28" tall tyres
11.85 11.87 consistent, 1.6 60ft,s 114mph trap speed
just fitted new 3500 stall verter so will see what that brings. i think putting the driver or car on a diet may just help too !!
keep it mopar !