Hi All,
Had to cut the centre bolts/pins off to separate and rebuild my rear springs on my charger, can I get away with using a cap head/hex bolt rather
than the correct centre bolts.
My other question is how important is the axle alignment on the back end, would there be any 'tracking' issues.
leaf centre pin & axle alignment
Moderator: Moderators
Re: leaf centre pin & axle alignment
Yes you can use a capscrew. Make sure the head is the correct diameter for the spring perch so correct alignment is maintained and you should have no issues.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
Re: leaf centre pin & axle alignment
Thanks Blue for your help/advice.
Mike.
Mike.