727 rebuilding jig/ holding stand ?

Moderator: Moderators

Post Reply
User avatar
Johnny Dart
Posts: 850
Joined: Tue Dec 24, 13 12:46 pm
Location: East Sussex

727 rebuilding jig/ holding stand ?

Post by Johnny Dart »

Does anyone have a 727 rebuilding stand , or know where I could buy one.
Thanks
Johnny
User avatar
Johnny Dart
Posts: 850
Joined: Tue Dec 24, 13 12:46 pm
Location: East Sussex

Re: 727 rebuilding jig/ holding stand ?

Post by Johnny Dart »

I made one
20221105_195903.jpg
20221105_195903.jpg (97.42 KiB) Viewed 6415 times
User avatar
Blue
Posts: 14242
Joined: Sun Apr 18, 04 11:29 pm
Location: Straight outta Royston

Re: 727 rebuilding jig/ holding stand ?

Post by Blue »

The one I made supports the trans from the same points. It rotates on the legs so I can have it upright for assembly. You can see it in the foreground.
Attachments
24A88781-4AC3-4AD2-A24E-390833090B8A.jpeg
24A88781-4AC3-4AD2-A24E-390833090B8A.jpeg (223.32 KiB) Viewed 6414 times
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
User avatar
Johnny Dart
Posts: 850
Joined: Tue Dec 24, 13 12:46 pm
Location: East Sussex

Re: 727 rebuilding jig/ holding stand ?

Post by Johnny Dart »

I've made this , so it will bolt up to my engine stand, and then , as you say I can spin it over or on its ends.
I think it will make rebuilding it a lot easier.
More pics when its on the stand.
User avatar
Johnny Dart
Posts: 850
Joined: Tue Dec 24, 13 12:46 pm
Location: East Sussex

Re: 727 rebuilding jig/ holding stand ?

Post by Johnny Dart »

Job jobbed :)
Attachments
20221107_143357.jpg
20221107_143357.jpg (103.55 KiB) Viewed 6381 times
User avatar
Blue
Posts: 14242
Joined: Sun Apr 18, 04 11:29 pm
Location: Straight outta Royston

Re: 727 rebuilding jig/ holding stand ?

Post by Blue »

Cool, that works!
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
Post Reply