Best looking SB rocker covers ? "shiny"

TIB3300 · Post by **TIB3300** » Thu Jan 19, 23 8:38 pm

Evening

I want to buy some pretty rocker covers for my 318

I know the cheap chrome chinese ones are to avoid

I want something shiny and as square looking as possible

I like the look of this type

Can anyone show me there's or tell me who sells them ?

Kev · Post by **Kev** » Fri Jan 20, 23 8:00 am

Crap web page but you get the gist.

https://www.hughesengines.com/Index/pro ... rtid=25884

TIB3300 · Post by **TIB3300** » Fri Jan 20, 23 10:35 am

Thanks Kev

but not keen on the welding beeing shown

Blue · Post by **Blue** » Fri Jan 20, 23 6:22 pm

Unfortunately due the shape of the heads, small block Mopar covers need to be far more rounded than those small block Chevy covers you have shown . There isn ‘t much choice these days when it comes to new covers, these are about the nicest IMO https://www.summitracing.com/parts/sum-440420

TIB3300 · Post by **TIB3300** » Fri Jan 20, 23 7:51 pm

Thanks Blue
Yes I have seen these , but not polished

Stu · Post by **Stu** » Wed Feb 01, 23 1:37 pm

Had this on email from Mancini this morning, if bling floats your boat.

TIB3300 · Post by **TIB3300** » Wed Feb 01, 23 4:09 pm

Thanks for the reply.
I should have updated you guys sorry. I do quite like the ones Kev highlighted

https://www.jegs.com/i/PRW/228/4031801/10002/-1

I would proffer cast , but can't seem to find a more square one in cast

I have also got in my basket, more shiny things

https://www.jegs.com/images/photos/700/ ... -472_2.jpg

https://www.jegs.com/images/photos/300/350/350-1720.jpg

TIB3300 · Post by **TIB3300** » Thu May 25, 23 8:37 pm

Well I went for the Mr gasket fabricated covers shown below .

A heads up on these be prepared to make the mounting face flat

. Took me a good hour per cover to sort them out

Pete · Post by **Pete** » Thu May 25, 23 9:15 pm

It's turning into a real show car!

TIB3300 · Post by **TIB3300** » Tue May 30, 23 7:19 am

Only bling under the bonnet Pete'

And If you do buy some of these, check the bolt threads coming through the cover.

As mine had 19mm of thread coming through the cover and the thread depth in the block was only 14mm.

Resulting is oil 9i55ing out of the drivers cover

Mopar Muscle Association UK

Best looking SB rocker covers ? "shiny"

Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"

Re: Best looking SB rocker covers ? "shiny"