Hood

sinny · Post by **sinny** » Wed Mar 07, 12 1:14 pm

Cannonball wrote:right for a start the strips what ever you use are going to be circa 2-3" in toward the middle than what you are showing you dont need to bolt down or sideways through the hood just direct bond/glass whichever material you go with i would then use the nice mopar hood pin kit for the front,
believe me wood bonded on wiill be perfect and light,

Right got it, thanks Dunc. & thanks to everyone for your input I'll let you know how I get on.

Jon Connolly · Post by **Jon Connolly** » Wed Mar 07, 12 1:16 pm

Sinny

If you want some Daytona hood springs I have a set in Swaffham ... you can have them if you want them

sinny · Post by **sinny** » Wed Mar 07, 12 1:52 pm

Jon Connolly wrote:Sinny

If you want some Daytona hood springs I have a set in Swaffham ... you can have them if you want them

That's brilliant, thanks Jon. Can you PM me the address & I'll sort out picking them up.

Jon Connolly · Post by **Jon Connolly** » Wed Mar 07, 12 7:17 pm

If I`ve got the tailgate gas struts you can have them too and have a play