David438`s 1970 Charger

Jon Connolly · Post by **Jon Connolly** » Tue Oct 05, 10 5:31 pm

Saw this today and it is slowly taking shape. All the rot is being cut out bit by bit and replaced prior to the main panel repair sections being welded in

Pete · Post by **Pete** » Tue Oct 05, 10 7:18 pm

I have met Dave and he is a really nice bloke, who clearly likes a challenge!
Looks like he's getting on with it, though

bazbiker · Post by **bazbiker** » Tue Oct 05, 10 8:28 pm

looks like the American Chargers rot in exactly the same places as the Australian ones, good luck

latil · Post by **latil** » Tue Oct 05, 10 8:51 pm

Dedication,though that really needs new rear quarters,not patches. Unless of course the budget is tight.

Anonymous · Post by **Anonymous** » Tue Oct 05, 10 9:54 pm

Hi Jon,

Nice work going on there!
That passenger Quarter looks like toast to me?
Has Dave got a skin for that?
If not I have a spare lower quarter skin here.

Bacca.

Jon Connolly · Post by **Jon Connolly** » Wed Oct 06, 10 5:25 am

Thanks Bacca

I think David may need any panels he can get. might be worth you sending him a pm

Anonymous · Post by **Anonymous** » Wed Oct 06, 10 8:36 am

I beleive the boy has most of the panels required, except for one which i forget. I was at his the other day for a brew and saw the front wings, which are looking good. i'll get on to him to make a update

david438 · Post by **david438** » Thu Oct 07, 10 8:28 pm

marknlindsey wrote:I beleive the boy has most of the panels required, except for one which i forget. I was at his the other day for a brew and saw the front wings, which are looking good. i'll get on to him to make a update

Thanks to Johnathan for posting me pics shame you have a good camera it may of not so bad if you didn't

thanks again anyone got some parts please let me know thanks all
David

david438 · Post by **david438** » Thu Oct 07, 10 8:40 pm

Jon Connolly wrote:Thanks Bacca

I think David may need any panels he can get. might be worth you sending him a pm

Thanks Johnathan for posting me pics shame you have a good camera it may of not so bad if you didn't thanks again anyone got some parts please let me know thanks all
David

Ivor · Post by **Ivor** » Fri Oct 08, 10 12:45 pm

Well done David, it takes a lot of dedication to take on that amount of panelwork with simply re-skinning the lot, good luck, crack on and don't give up!

david438 · Post by **david438** » Fri Oct 08, 10 12:54 pm

Ivor wrote:Well done David, it takes a lot of dedication to take on that amount of panelwork with simply re-skinning the lot, good luck, crack on and don't give up!

Thanks Ivor very daunting but we will breath live back into it.........Not sure when tho

Kind regards
David