ansen slot mags
Moderator: Moderators
ansen slot mags
Have steelies on the car, also have dog dishes (not on at the mo, prefer the look). Fancy a set of ansen mags. Small bolt pattern. 15 x 7" 4" backspace, 4" PCD. Would these fit all round or would 6" on front be better? What do you think. Thanks, Gerry
- Attachments
-
- ansen.jpg (222.13 KiB) Viewed 740 times
-
- steelies.jpg (245.26 KiB) Viewed 740 times
From all the research i did Ivor is spot on.........6" on the front should give no issues and are about as big as you'd want to go.
7" on the back is fine....dependant on rear end setup i know of some guys in the states that have even managed to get 8's under the rear.......
Personally 6 at the front and 7 at the back should be just fine.
Here's a useful tool for finding out the what the rubber should look like on the rims.......
http://www.kouki.co.uk/utilities/visual ... calculator
7" on the back is fine....dependant on rear end setup i know of some guys in the states that have even managed to get 8's under the rear.......
Personally 6 at the front and 7 at the back should be just fine.
Here's a useful tool for finding out the what the rubber should look like on the rims.......
http://www.kouki.co.uk/utilities/visual ... calculator
Dave Tildesley.....MMA-081
72 Dodge Dart
73 Plymouth Duster - SOLD
I wanna go so FAST i think i'm going to DIE!..........Then i'll shift into second!
"My Car is a work in progress, Probably never gonna get finished, never gonna have the money to Bananarama!!"
72 Dodge Dart
73 Plymouth Duster - SOLD
I wanna go so FAST i think i'm going to DIE!..........Then i'll shift into second!
"My Car is a work in progress, Probably never gonna get finished, never gonna have the money to Bananarama!!"
plenty of aussie A bodies running 14 inch 7 inch wide wheel on the front
VF VG dart-a-likes and standard fitment on RT charger
can't think 15 inch would make much odds
standard pacerb steel wheels were 6.5
may be wider track due to disks in the land down under or larger turning circule due to backwards RHD steering (idler and steering box on the chassis facing forwards )
Dave
VF VG dart-a-likes and standard fitment on RT charger
can't think 15 inch would make much odds
standard pacerb steel wheels were 6.5
may be wider track due to disks in the land down under or larger turning circule due to backwards RHD steering (idler and steering box on the chassis facing forwards )
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying