Fifty shades of Jade

[morgan]

Just wow.

I love it when Will comes back

[autofetish]

A massive amount of time went into the jig which was frustrating

Hoping that having a truly level jig will allow me to bolt fixtures on and take measurements quickly from reference holes and lines

[Pete]

As cool as Penguin pee.....

[Dom66]

And the award for the coolest workshop goes to....

[autofetish]

Jigged out the front axle and swing

[morgan]

I think a wooden chassis is brave. Thinking outside the 'box' hahahahahaha

(seriously, epic work. You achieve more in a day than I can in a month)

[RobTwin]

The Morris Traveller of drag bikes

[mopar_mark]

I thought the wood was just the template for honeycomb aluminium & carbon fibre spine

[mygasser]

i 'wooden' like to be on that at 200 mph

[autofetish]

Have decided I have made a big mistake here.

The turbo should be rotated 90°this will allow me to use Ram air but more importantly take the air from areas of high pressure to reduce aerodynamic drag.

So Iater I will adapt the turbo manifold

[autofetish]

Have decided that maybe wood isn't the best ideas and will use steel tube.

I got some scrap metal to build a frame purely to represent the shape and get comfortable on it.

This will allow me to mock up a frame and finalize design Without cutting up expensive tube

[autofetish]

Have decided that the frame will be as small and as lean as possible.

Later bodywork can support rider

Having decided on frame Width I started building fixtures which the frame will be build to.

[autofetish]

The front end will use a single swing arm design abit like the rear end of a normal bike

The interface from steel tube to swing arm Pivot points will be via these steel bushes made on a lathe.

They will be held in a fixture and frame tubes brought up to them.

If that makes sence ..

Cad MMA 45.JPG (41.96 KiB) Viewed 1000 times

[ScottyDave]

Going to be another interesting build this one

[morgan]

Holy moomoo !