70 Cuda and 72 Challenger PCD different?
Moderator: Moderators
70 Cuda and 72 Challenger PCD different?
I tried to fit a nice set of Cragar wheels to my 72 Challenger today, they were from a 70 Cuda and they don't fit.??? I thought the PCD would be the same??
- Attachments
-
- cragar 005.JPG (138.23 KiB) Viewed 588 times
P38 Range Rover 2.4d
2015 V6 Challenger
Remember - You are required to get older but you are not required to grow up!
2015 V6 Challenger
Remember - You are required to get older but you are not required to grow up!
- Cannonball
- Posts: 17242
- Joined: Sun Apr 18, 04 11:26 pm
- Location: crewe, cheshire
- Contact:
Re: 70 Cuda and 72 Challenger PCD different?
they are some ones been tinkering,,,,,,,,,,,xbrit wrote:I tried to fit a nice set of Cragar wheels to my 72 Challenger today, they were from a 70 Cuda and they don't fit.??? I thought the PCD would be the same??
www.dwatts80.fsnet.co.uk
WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME
OFTEN OUTNUMBERED NEVER OUTGUNNED,
HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,
I HAVE A NVQW
LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,
THE PASS IS THE JUICE,
LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
WATTS RACING TRANSMISSIONS, CLOBBER THE COMPETITION ITS CLOBBERIN TIME
OFTEN OUTNUMBERED NEVER OUTGUNNED,
HEY WHATS THE TOP END ON THAT SUPERSPORTS. UNLIMITED,
I HAVE A NVQW
LIFE GOES PRETTY FAST, IF YOU DONT LOOK ROUND A WHILE YOU MAY JUST MISS IT,
THE PASS IS THE JUICE,
LOVED BY FEW,
HATED BY MANY
RESPECTED BY ALL
Thanks guys, you are correct, the Cragar's have slotted lug nut holes and the packing washers center hole was not concentric. I was rushing the job to see Chelsea beat the Spurs.
They do fit.
Cheers,
They do fit.
Cheers,
P38 Range Rover 2.4d
2015 V6 Challenger
Remember - You are required to get older but you are not required to grow up!
2015 V6 Challenger
Remember - You are required to get older but you are not required to grow up!