Hub cap with steelie help

Dave81 · Post by **Dave81** » Sat May 30, 15 5:13 pm

adrianp wrote:
vipergts wrote:I spoke to Northants and they told me custom BS not available?

Might just be lazy

Will try summit
You can ring Wheel Vintqiues direct, that's what I did when having a chat to them about a custom BS. You're after the 63 series:

http://www.wheelvintiques.com/index.php ... eries.html

They are only available in one bolt circle which is 5 x 4.5"

I don't know how you're planning on brining them over but if it's by air I'd suggest giving Mark@WASP a call as he sourced mine. I have the series 63 as well but a standard BS. He may also be able to advise how to go with the custom BS on these wheels.

adrian.

Sorry Adrian, not true. You can get them in 5x 4".

Had them bookmarked for two years awaiting finances, but other stuff keeps requiring upgrading first.

Viper......Unless it's an A body (pre 73), then its 4.5 PCD.

vipergts · Post by **vipergts** » Sat May 30, 15 9:47 pm

Thanks Chaps

I may well talk to Mark at WASP

The wheels i have are Genie 10x15 with 5" BS

I'm not sure the 295 will fit and was wondering about a lesser tyre but a 275 60 will be too tall and a 50 too low.....I don't think they do them as a 55.

I'm going around in circles at the moment

I'll offer up one of the wheels I have and go from there

adrianp · Post by **adrianp** » Sat May 30, 15 9:55 pm

Best of luck with it - you'll get there eventually

I remember choosing the wheels/tyres on mine and it can be a bit of a minefield. I would have preferred to have gone 15x10 out back but the tyre choice meant I went with 15x8.

Also, if you strike out with Wheel Vintiques you can also give these guys a call:

http://www.stocktonwheel.com/

A few of the guys on the 66/67 forum used them to get 15x10s with a custom BS to suit.

adrian.

GJUK · Post by **GJUK** » Sun May 31, 15 12:29 am

vipergts wrote:
Blue wrote:Wheel vintiques series 63 original Chrysler wheels.....
15x10 seem to only be available with a 5.5" BS which is too much for me

I am just having some made with a 4.2" backspace via Summit. $20 extra per wheel and 5 week wait.

MilesnMiles · Post by **MilesnMiles** » Sun May 31, 15 7:51 am

I settled on 15 x 8 and 255 x 69 tyres and ws pleased at how much they fill out the arches.

Scroll down the page and you can see how they fit

http://www.moparuk.com/forums/viewtopic ... c&start=45

vipergts · Post by **vipergts** » Sun May 31, 15 1:57 pm

Cheers Guys

Need to see the fit on a B bod Charger really

I have 255 curently