Anybody removed a vynil roof, is it as easy as I think.
Rip it off, rub down , paint. Or are there some pitfalls,... any advice.
Cheers.
Vynil roof removal
Moderator: Moderators
-
- Posts: 1862
- Joined: Wed Jan 10, 07 4:03 pm
- Location: North Yorkshire
Re: Vynil roof removal
The pitfalls are when you take it off theres likely to be rust underneath. Just take all the trim off first then pull.
Are we there yet dad ..... 10 to the gallon but worth it.
MMA Public Relations Officer.
MMA South London and Surrey Area Rep.
MMA Public Relations Officer.
MMA South London and Surrey Area Rep.
Re: Vynil roof removal
Agree there can be all sorts hidden, Challenger was very bubbly on the long roof leaded joint.
Matt Hollingsworth - Vehicle Registrar
Panther Pink 73 Aussie Charger 265 Hemi 4 spd
Challenger Sam Posey Tribute car
Panther Pink 73 Aussie Charger 265 Hemi 4 spd
Challenger Sam Posey Tribute car
-
- Posts: 1862
- Joined: Wed Jan 10, 07 4:03 pm
- Location: North Yorkshire
Re: Vynil roof removal
Oh , have to have a think. Thanks for the replys.
Re: Vynil roof removal
the vinyl is behind the moulding clips steve,so impossible to fully remove without removing front and rear screens,unless its ruff,leave alone.
- deppmobile
- Posts: 132
- Joined: Mon Oct 03, 16 4:00 pm
Re: Vynil roof removal
And a roof that looks nice and smooth under a vinyl roof can be covered in dents.....
-
- Posts: 1862
- Joined: Wed Jan 10, 07 4:03 pm
- Location: North Yorkshire
Re: Vynil roof removal
Right ...Thats it, will leave it alone. Heard manufacturers kept all the "dodgy roofed" shells for vynil options. Sounds like I could be opening a can of worms. Plus glass removal is an added pain.