leaf centre pin & axle alignment
Posted: Tue Apr 17, 18 12:36 pm
Hi All,
Had to cut the centre bolts/pins off to separate and rebuild my rear springs on my charger, can I get away with using a cap head/hex bolt rather
than the correct centre bolts.
My other question is how important is the axle alignment on the back end, would there be any 'tracking' issues.
Had to cut the centre bolts/pins off to separate and rebuild my rear springs on my charger, can I get away with using a cap head/hex bolt rather
than the correct centre bolts.
My other question is how important is the axle alignment on the back end, would there be any 'tracking' issues.