Mopar Muscle Association UK

pete walton wrote: ↑Sat Jul 04, 20 4:53 pm When and I use the word when in its loosest term Pete my car is done I will sell of all the parts ....

I might not live that long, I was planning to do the conversion in the next 5 years.....

Martin - any info on the carbs would be appreciated, thanks.

I guess the fun bit is finding all the linkages, etc; hence the benefit of buying the kit with the crap carbs on.....

Pete - you and I know full well you will be going for the MW set up, so the lowly 440 set up must be going spare.....

Pete wrote: ↑Sat Jul 04, 20 7:00 pmI guess the fun bit is finding all the linkages, etc; hence the benefit of buying the kit with the crap carbs on.....

It’s not that hard to make your own or get your own made, far better than wasting good money on Bananarama! carbs

Agreed, Mark.

I like the way this thread has gone from "It's completely Original" to "Cut it up" in the space of two pages.....

Pete wrote: ↑Sat Jul 04, 20 8:17 pmI like the way this thread has gone from "It's completely Original" to "Cut it up" in the space of two pages.....

Must be a sign

I'm Doomed!!!!

Im glad you listened Pete

Pete wrote: ↑Sat Jul 04, 20 6:52 pm

pete walton wrote: ↑Sat Jul 04, 20 4:53 pm When and I use the word when in its loosest term Pete my car is done I will sell of all the parts ....

I might not live that long, I was planning to do the conversion in the next 5 years.....

Blimey five years mate what’s the rush

Hi Pete
List numbers 4235 and 4236. Original Holley carbs for 1968 426 Hemi and 64-65 Max wedge fitted with a cross ram manifold. 4235 is the right side carb, 4236 the left. Only done cam break in and dyno run.

SAV@RPM wrote: ↑Sun Jul 05, 20 5:58 pm Hi Pete
List numbers 4235 and 4236. Original Holley carbs for 1968 426 Hemi and 64-65 Max wedge fitted with a cross ram manifold. 4235 is the right side carb, 4236 the left. Only done cam break in and dyno run.

Thanks Martin!

Probably out of my price range at the moment - and I need to get a Cross ram first if Walton ever pulls his finger out - as I am only at the "Concept" stage at present!!!!

All the best as ever.

Pete

Hi Pete
No problem, I might put them in the for sale section with some photos. All the best.
Martin.