Mopar Muscle Association UK

Has anyone got any good links for replacement front subframe bushes? Mine resemble swiss cheese & the car wallows in corners worse than any yank I’ve ever owned!

Here you go

https://www.rockauto.com/en/catalog/dod ... 79456,body


you can also get poly bushes for the torsion bar Xmbr as well,

https://www.rockauto.com/en/catalog/dod ... hing,10419

Thanks for the links Scotty,

Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673

Yes you need those and the torsion bar crossmember bushes to sort out the front mounts. The back axle it also on horrible rubber insulators for added slop....

RAGNAR wrote: ↑Thu Jul 16, 20 4:02 pm Thanks for the links Scotty,

Unfortunately I can’t get the first one to open properly. I’ve tried on my phone & pc. Is it the body mounts that I need?
https://www.rockauto.com/en/catalog/dod ... +mount,673

Yes that's the one's I'd replace the torsion bar Xmbr bushes as well.

Firmfeel do the option of a solid alloy mount.

As Blue says the rear leaf springs are encased in rubber as well, have a look here.

https://www.rockauto.com/en/catalog/dod ... ator,13637

When I did some work on a mates '73 years ago, we replaced all the front insulators with ally spacers and I modded the rear to get shot of the insulators on the axle.

Blue wrote: ↑Thu Jul 16, 20 8:04 pm and I modded the rear to get shot of the insulators on the axle.

That's the route I've gone down as I had to replace my rear springs anyway. I've got the poly bushes for K frame and torsion xmbr.