Page 4 of 6

Re: My Cuda

Posted: Tue Jan 12, 21 7:21 pm
by ScottyDave
Maybe a little bit too much vino :drunken:

Re: My Cuda

Posted: Tue Jan 12, 21 8:20 pm
by mygasser
a sales pitch for the 'reviewed' polishing product the link is for?
neil.

Re: My Cuda

Posted: Tue Jan 12, 21 8:27 pm
by mygasser
ScottyDave wrote: ↑Tue Jan 12, 21 7:21 pm Maybe a little bit too much vino :drunken:
you could be onto something there :D

Re: My Cuda

Posted: Mon Jan 18, 21 6:27 pm
by mopar_mark
Body prep nearly finished

Image

Re: My Cuda

Posted: Tue Jan 19, 21 10:07 am
by autofetish
Wow wow wow


Keep the updates coming fella !


:read2: :read2: :read2: :read2: :read2: :read2: :read2: :read2:


:thumbright: :thumbright: :thumbright: :thumbright: :thumbright: :thumbright: :thumbright:


:geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek: :geek:

Re: My Cuda

Posted: Tue Jan 19, 21 10:43 am
by kma176
Brilliant work - doing it in the dinning room as well !!!

Re: My Cuda

Posted: Tue Jan 19, 21 1:52 pm
by mopar_mark
Demasked.... :)

Image

Re: My Cuda

Posted: Wed Jan 20, 21 8:05 pm
by autofetish
:twisted: MONSTER :twisted:

Re: My Cuda

Posted: Thu Jan 21, 21 9:35 pm
by mopar_mark
No change other than car off to the spray booth, but I thought it was a cool photo 😎

Image

Re: My Cuda

Posted: Thu Jan 21, 21 11:39 pm
by RobTwin
That's just showing off 8-)

Re: My Cuda

Posted: Fri Jan 22, 21 8:04 am
by Charger
very cool 8-)

:thumbright:

Re: My Cuda

Posted: Fri Jan 22, 21 8:08 am
by DougieJ
8-) Ice Cold 8-)

Re: My Cuda

Posted: Fri Jan 22, 21 8:21 am
by Dom66
:) :thumbright:

Re: My Cuda

Posted: Fri Jan 22, 21 1:45 pm
by Stu Twin
Did you get loads of dust inside that interior? if you did i hope it blows out with an air line.
Lots of nooks and crannies in there.

Re: My Cuda

Posted: Fri Jan 22, 21 7:50 pm
by mopar_mark
Stu Twin wrote: ↑Fri Jan 22, 21 1:45 pm Did you get loads of dust inside that interior? if you did i hope it blows out with an air line.
Lots of nooks and crannies in there.
I removed all the electrics & fitted the carbon floor to help keep the dust out. Under side of chassis was masked off/taped to the floor to prevent dust entering from underneath. Naturally, all windows were masked off, as was the trunk. Dust was minimal/hardly any. Bry is great painter, hot Rodder & takes pride in his work, so I know it will come back clean.

One of the best presents my daughter bought me is a Henry Hoover, he’s invaluable & does a great job every time.No doubt he will be put back to work when the car arrives.