1976 Dodge D100 (Californian)
Moderator: Moderators
1976 Dodge D100 (Californian)
Hi all
It's been suggested that I start a workshop thread so here goes.
I have always loved Dodge tin grille trucks probably through growing up near to American military bases, I'd hear a v8 rumble then see a Dodge tailgate disappearing
Had a '72 Short bed ages ago as my daily (sold to fund 1st house) and W350 (fire truck) that I never got going on
So last Xmas my wifes present to me was a truck fund that she'd been saving
So the hunt was on, there were a few over here but I was being picky about what I wanted had to be '74 - '79 swb, v8, auto 2wd, there were some nice ones but not as above and soon realised that I'd have to import one
Contacted a few dealers and joined some FB sites dedicated to tin grille trucks, many available but few willing to sell abroad
Eventually found one in California that looked good after many messages photos/videos etc I bit the bullet in February and it arrived in July
So to the truck as the topic states it's a "Californian" which is essentially a dealer special difference from a standard utiline are the paint job which is much faded but was originally medium poly blue with thin pinstripes around all the body lines and the non Dodge rear fenders
Which are fibreglass. Rumour has it as these are GM style (not but close) that GM sued and the stopped using them, not much out on the Internet on the "specials" apart from some photos. Bound to get Chevy fenders comments from people but I'll educate them one at a time
I've already started working on it and hopefully get it on the road this year and will get photos of progress soon
It's been suggested that I start a workshop thread so here goes.
I have always loved Dodge tin grille trucks probably through growing up near to American military bases, I'd hear a v8 rumble then see a Dodge tailgate disappearing
Had a '72 Short bed ages ago as my daily (sold to fund 1st house) and W350 (fire truck) that I never got going on
So last Xmas my wifes present to me was a truck fund that she'd been saving
So the hunt was on, there were a few over here but I was being picky about what I wanted had to be '74 - '79 swb, v8, auto 2wd, there were some nice ones but not as above and soon realised that I'd have to import one
Contacted a few dealers and joined some FB sites dedicated to tin grille trucks, many available but few willing to sell abroad
Eventually found one in California that looked good after many messages photos/videos etc I bit the bullet in February and it arrived in July
So to the truck as the topic states it's a "Californian" which is essentially a dealer special difference from a standard utiline are the paint job which is much faded but was originally medium poly blue with thin pinstripes around all the body lines and the non Dodge rear fenders
Which are fibreglass. Rumour has it as these are GM style (not but close) that GM sued and the stopped using them, not much out on the Internet on the "specials" apart from some photos. Bound to get Chevy fenders comments from people but I'll educate them one at a time
I've already started working on it and hopefully get it on the road this year and will get photos of progress soon
- Attachments
-
- FB_IMG_1644957982216.jpg (126.94 KiB) Viewed 4362 times
-
- 20220315_155900.jpg (132.77 KiB) Viewed 4362 times
Re: 1976 Dodge D100 (Californian)
That is a good looking truck - just the right amount of genuine patina. And the rear wings do look very C10!
Alan; whose 72 Challenger is inexorably taking over the house.
Re: 1976 Dodge D100 (Californian)
I do like a short bed truck I had a ‘69 D100 years ago that I used daily, probably the only thing I’ve ever regretted having to sell. To add insult to injury someone left it sitting in a garden to rot for years and it eventually got scrapped.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 1976 Dodge D100 (Californian)
Good to see the thread, good luck with the build, will be watching progress.
I agree, I like a swb truck. Excellent potential.
I agree, I like a swb truck. Excellent potential.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 1976 Dodge D100 (Californian)
your truck looks very good and a nice California patina that tell the history of the truck.
Look forward to see what work is gone be done
Look forward to see what work is gone be done
- Captain Chaos
- Posts: 1877
- Joined: Sun Jan 23, 11 11:32 pm
- Location: Royal Tunbridge Wells
Re: 1976 Dodge D100 (Californian)
Nice truck
Re: 1976 Dodge D100 (Californian)
Starting sorting the lights straight away, I wanted to keep the original tail lights rather than put modern ones on so have fitted indicators where the original reversing lights were just by making an adaptor plate and sorting wiring of course. Don't know it's just age related or coming from a hot state but all bulbs I found has concave indents on the bulb contacts
Oh and the tailight lenses are available on amazon from the original manufacturer!
Oh and the tailight lenses are available on amazon from the original manufacturer!
- Attachments
-
- IMG-20220808-WA0019.jpg (46.13 KiB) Viewed 4248 times
-
- 20220808_160351.jpg (76.77 KiB) Viewed 4248 times
Re: 1976 Dodge D100 (Californian)
Going through electrical tidy up at the moment, both battery cables were toast so made new ones. Instrument cluster pins were either broken or wobbly so had some leccy experts solder those back on. The ammeter is a known fire hazard on trucks (I assume cars too?) Someone had already bypassed it and added an aftermarket one as it had got a bit warm but wiring had been connected with things that I believe are called "wire nuts" and + wire went through bulkhead with no grommet!
- Attachments
-
- 20220728_171725.jpg (50.83 KiB) Viewed 4205 times
-
- 20220728_100743.jpg (54.2 KiB) Viewed 4205 times
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 1976 Dodge D100 (Californian)
Our esteemed chairman has a brilliant term for this stage of getting into a build and fixing other peoples fixes, which I shan’t repeat on a family show.
Keep the updates coming.
Keep the updates coming.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 1976 Dodge D100 (Californian)
might find ammeter as and instrument is fine and its just the insulation betwen the 2 Studs the current flows through and what they bolt through
i.e the plastic top hat insulation washers sold by electronic stores for insulating the tabs on massive high power transistors can be put to good use to restore it to normal operation.
the insulation in there orginally will have become brittle and fallen out, or have melted and allowd the guage to droop shorting 1 or both studs to something or other.
ammeter is a feature of all of these vehicles and provided you keep battery sensible, alternator of 30-50 amps and the total drain you pull through the bulkhead connector in he 1-25 amp range all should be ok if the connectors are all nice and clean.
if they are not and are covered in green virdigris. all of it gets hot enough to melt stuff
design was sound enough.... as with most things age is the problem, mainly in the last 6 inches of every wire and its connector ... it was all designed to last about 5 years not 50... wire in the wrapped loom will most likely look much the same as it did day 1 bright colours and flexible. shiny copper.... as i say its the bits that stick out that ware degrade and the insulation splits
Dave
i.e the plastic top hat insulation washers sold by electronic stores for insulating the tabs on massive high power transistors can be put to good use to restore it to normal operation.
the insulation in there orginally will have become brittle and fallen out, or have melted and allowd the guage to droop shorting 1 or both studs to something or other.
ammeter is a feature of all of these vehicles and provided you keep battery sensible, alternator of 30-50 amps and the total drain you pull through the bulkhead connector in he 1-25 amp range all should be ok if the connectors are all nice and clean.
if they are not and are covered in green virdigris. all of it gets hot enough to melt stuff
design was sound enough.... as with most things age is the problem, mainly in the last 6 inches of every wire and its connector ... it was all designed to last about 5 years not 50... wire in the wrapped loom will most likely look much the same as it did day 1 bright colours and flexible. shiny copper.... as i say its the bits that stick out that ware degrade and the insulation splits
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
Re: 1976 Dodge D100 (Californian)
just follow the board guidelines stu....
un bananaramaring what has been bananaramerd by a previous banana
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 1976 Dodge D100 (Californian)
Yep, un Bananarama! stuff is the one.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 1976 Dodge D100 (Californian)
Got some new tyres on today, found some marks on the back of the slot mags saying size (15 × 8.5) "wheel dist inc" and "Ontario Cal" so nothing special I'd imagine there were loads of people making wheels back then
Rather than stainless strips in the bed I've used the original repaired one section and am painting them hammerite blue in a nod to the original finish as Dodge would have painted everything inc wood body colour
Rather than stainless strips in the bed I've used the original repaired one section and am painting them hammerite blue in a nod to the original finish as Dodge would have painted everything inc wood body colour
- Attachments
-
- 20220823_100521.jpg (54.02 KiB) Viewed 4130 times
-
- 20220823_104313.jpg (124.12 KiB) Viewed 4130 times
Re: 1976 Dodge D100 (Californian)
By the shape of the slots I’d say those are Shelby Cal 500 wheels, probably my favourite slot mag style.
“This ain’t no party, this ain’t no disco, this ain’t no foolin’ around”