Jason's Polara

[Stu]

That’s a cracking tip!

[Blue]

Bit more wiring, replacing the crusty fuse box…

[Bozwell]

Glow Blow Fuse

[Blue]

Nifty, not seen those before. I'm going to have to buy some now....

[Pete]

Nifty, not seen those before. I'm going to have to buy some now....

Liking that idea!! Great suggestion!

[Blue]

Even though Jason is gone work continues, I promised him the car would be finished as he wanted, he was still talking about it the day before he died. 727 is all back together with a Trans go shift kit and my usual mods, a reusable gasket and a cast pan round it off. That should keep it leak free. Last job of the day was to install it back in the car.

[mopar_mark]

Good & simple idea for holding converter in place, even more so when your working on your own

[Stu]

[Blue]

Took a break in the weather to slosh some paint around, I use Rustoleum Combicoat for stuff like this, needs no primer, is hard wearing and flows on lovely. It thins with Acetone so doesn’t bloom if it’s a bit cold and damp in my experience.

[Blue]

Washer bottle sorted…

[Stu]

Decathlons finest.

[Stu]

I’ll check out that paint, I’ve used smoothright in the past for K frame and such on the Barracuda, but was thinking a refresh on the Challenger might be good when the lump is out. Looks good.

[Blue]

It’s very slow drying so even if you Bananarama! on you get a good finish. Covers in one coat too, I normally give it a day to dry.

[Stu]

Was that slosh

It?

[Blue]

Not sure why it didn’t like brush….