Holley Sniper

morgan · Post by **morgan** » Sun Sep 24, 23 8:48 pm

Just got back from US and found this in my suitcase ! Result ! Appears to be the new 'sniper2' with dizzy and coil and loom and automatic timing blah blah blah. I'm not a purist.

Guess my winter project is sorted then...

It'll be a slow burn thread but I will keep it updated

Dave999 · Post by **Dave999** » Mon Sep 25, 23 9:31 am

Nice

get it on there

Dave

Post by **MattH** » Mon Sep 25, 23 1:35 pm

Contemplating this as well, so I am keen to see how you get on.

mr m · Post by **mr m** » Tue Sep 26, 23 12:09 pm

Got it on the mustang 347 stroker runs sweet, when wiring in lots of the wiring needs to be cut and shut to keep it tidy or just tie wrap it up and hide the excess, also if you run a e/fan you can wire it in and set it via ecu programme

morgan · Post by **morgan** » Wed Sep 27, 23 2:54 pm

I was just going to go the sniper route - but decided that I might as well have it do the timing as well - so I got the dizzy and the electronics which will play nice with the injection. Mt current timing is fixed due to lack of vacuum so this should play nicer.
We'll see. There are a LOT of boxes...

Will have a 12V MSD all-in-one setup for sale at the end... get rid of that ballast resistor folks !

Mopar Muscle Association UK

Holley Sniper

Holley Sniper

Re: Holley Sniper

Re: Holley Sniper

Re: Holley Sniper

Re: Holley Sniper