70 Challenger splash guards
Moderator: Moderators
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
70 Challenger splash guards
No idea if that’s the correct name, can’t find them in the manuals, but I need a pair of the small panels that cover these holes in the inner wings, plus the clips.
Ta.
Ta.
- Attachments
-
- IMG_0539.jpeg (172.05 KiB) Viewed 1305 times
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 70 Challenger splash guards
I made my own out of some 2.5mm(??) sheet from an old plastic packing crate
a bit of heat to get the shape, they don't sit quite flat despite how they look in the photos
I did already have the spring clips from the original installation
a bit of heat to get the shape, they don't sit quite flat despite how they look in the photos
I did already have the spring clips from the original installation
- Attachments
-
- 100_2393.JPG (122.19 KiB) Viewed 1265 times
-
- 100_2514.JPG (195.35 KiB) Viewed 1265 times
Si
1970 Charger 500
383 | 4bbl | 727 column | PAS | PAB | buckets/buddy - check out my photos HERE
If you don't want another same old brand-new car ... you could be DODGE MATERIAL
1970 Dodge Charger Registry - https://www.1970chargerregistry.com/
1970 Charger 500
383 | 4bbl | 727 column | PAS | PAB | buckets/buddy - check out my photos HERE
If you don't want another same old brand-new car ... you could be DODGE MATERIAL
1970 Dodge Charger Registry - https://www.1970chargerregistry.com/
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 70 Challenger splash guards
That looks pretty tidy, but no clips here either, so will need to source them as well.
Can’t find anyone repopping, that I can see. Bit frustrating.
Can’t find anyone repopping, that I can see. Bit frustrating.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 70 Challenger splash guards
Hey Stu,
I did the same as Si, just cut some new rubber but put some M5 washers under the heads so it's easier to remove without ripping the rubber.
It looks like the clips are available, hopefully shipping isn't too bad if they're in a jiffy bag. if it was Summit they would be in a bag, inside a small box, inside a medium box just to inflate the shipping
https://www.detroitmuscletechnologies.c ... ield-clip/
Stuart.
I did the same as Si, just cut some new rubber but put some M5 washers under the heads so it's easier to remove without ripping the rubber.
It looks like the clips are available, hopefully shipping isn't too bad if they're in a jiffy bag. if it was Summit they would be in a bag, inside a small box, inside a medium box just to inflate the shipping
https://www.detroitmuscletechnologies.c ... ield-clip/
Stuart.
- Attachments
-
- Picture2.jpg (38.83 KiB) Viewed 1245 times
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 70 Challenger splash guards
Cheers Stu
I’ll see what I can turn up if no one’s got any.
I’ll see what I can turn up if no one’s got any.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 70 Challenger splash guards
“Inner fender shields” I’ve finally found them as!
Now to find a pair somewhere…
Now to find a pair somewhere…
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 70 Challenger splash guards
are you missing these as well
https://www.ebay.co.uk/itm/375212518673 ... LvEALw_wcB
i.e if ordering kill to birds with 1 stone
i have a set of A body ones but different from the ones above
Dave
https://www.ebay.co.uk/itm/375212518673 ... LvEALw_wcB
i.e if ordering kill to birds with 1 stone
i have a set of A body ones but different from the ones above
Dave
The Greater Knapweed near the Mugwort by the Buckthorn tree is dying
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 70 Challenger splash guards
That’s a good question, Dave.
Quick answer is… I don’t know!
I’ll have a check when I can see it.
Quick answer is… I don’t know!
I’ll have a check when I can see it.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 70 Challenger splash guards
MCT (Musclecar Technology) in the States do lots of stuff like that. They make them using originals as templates
Bat Girl Stalker Living Petes Dream
Re: 70 Challenger splash guards
Bat Girl Stalker Living Petes Dream
- Stu
- Posts: 6898
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 70 Challenger splash guards
Cheers Steve, appreciate that.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 70 Challenger splash guards
Bat Girl Stalker Living Petes Dream