Blue's winter refit

dustymopar · Post by **dustymopar** » Tue Feb 03, 09 6:59 pm

T'is all lookin mighty fine

Will run your steering alingment gadget back to you soon

AllKiller · Post by **AllKiller** » Tue Feb 03, 09 8:19 pm

Thought you would have made that top rad support removeable Blue ?

Wheres the best place to get the Billet stuff, is it needed on a stroker...
or is it more belts n braces ?

Looking Good

Blue · Post by **Blue** » Tue Feb 03, 09 8:22 pm

It is removable, you can see the bolts if you look closely...

Anonymous · Post by **Anonymous** » Tue Feb 03, 09 8:22 pm

Blue have you had any hassle with the coloured lights? from the law?

AllKiller · Post by **AllKiller** » Tue Feb 03, 09 8:23 pm

Added something

Guy · Post by **Guy** » Tue Feb 03, 09 8:26 pm

Try here Steve http://www.coperacingtrans.com/

Blue · Post by **Blue** » Tue Feb 03, 09 8:30 pm

Mo, had no interest at all from the law so far. Steve, I use John Cope for billet parts. Not strictly necessary to use billet servo's, unless using a 'brake with very high line pressure. The standard cast parts are not that stout, and I have come across broken ones, so I thought I'd use them just in case.

AllKiller · Post by **AllKiller** » Tue Feb 03, 09 8:32 pm

Thanks

Blue · Post by **Blue** » Wed Feb 11, 09 6:36 pm

Engine and gearbox back in at long last, still got most of the ancillaries to sort out, but it's progressing. Pictures and more details soon...

Jeff · Post by **Jeff** » Wed Feb 11, 09 6:38 pm

Wey Hey!

TrevD · Post by **TrevD** » Wed Feb 11, 09 8:30 pm

blue, do you have any of the billt parts in stock?? id like to measure them and maybe i could supply a similar item (but probably better ) at a reasonable cost

Rogue Trooper · Post by **Rogue Trooper** » Wed Feb 11, 09 8:54 pm

Blue did you crack open a couple,

Philth · Post by **Philth** » Thu Feb 12, 09 8:13 pm

When's the fire-up Blue? Need a hand/extra pair of eyes? I'll be ready with the petrol soaked rag and me favourite screwdriver....

....may even bring a hammer.

And some plasters.

Blue · Post by **Blue** » Sat Feb 14, 09 2:57 pm

I'll let you know Phil, still have the intake plumbing and linkage to sort, numerous other small jobs too. Trev, which billet parts do you mean? Pulleys are only fitted loosely at the moment, sorry but I had to give them a coat of "Anti-bling", I can't be doing with too much shiny...

Anyway, here's where we are now.

Pete · Post by **Pete** » Sat Feb 14, 09 3:13 pm

More room in there now with a 400, ehh?

Did you sort your header clearance issues out?