wanted ....remote oil filter housing

aussie pete · Post by **aussie pete** » Tue Aug 06, 13 6:53 pm

I have listed this here as I believe that this is unique to Aussie cars.

I need (as pictured) a remote oil filter housing, the bit that bolts on to the rear of the engine block (one without the crack in it would be good

)

Steve · Post by **Steve** » Tue Aug 06, 13 7:11 pm

I cant quite make out whats going on in your pic mate (my thickness...not your photography!).....I have a remote set up from an early 383 used in a Jensen if its any good to you?? Excuse my ignorance if Im way off the mark

Cheers Steve

Blue · Post by **Blue** » Tue Aug 06, 13 7:47 pm

No it's a small block Aussie only deal Steve. Pete, try Minty or Matt Hollingsworth, they are the sort of guys that might have one.

aussie pete · Post by **aussie pete** » Tue Aug 06, 13 8:06 pm

Its not easy to take a clear picture as its a bit crowded in that area (As the Aussies off set the engine 1" to the right(the same as the yanks) but with rhd that means everything is cramed into the same place.
The housing is cast iron and sits at the bottom rear of the rh side of the engine block.
A little bit of over zelous tightening resulted in the casting collapsing
Cheers blue,..good shout ,.ill try them

Minty · Post by **Minty** » Tue Aug 06, 13 8:27 pm

Pete i may have one somewhere,will have a poke around,fingers crossed

aussie pete · Post by **aussie pete** » Tue Aug 06, 13 8:35 pm

cheers Minty

aussie pete · Post by **aussie pete** » Tue Aug 06, 13 8:35 pm

cheers Minty

aussie pete · Post by **aussie pete** » Tue Aug 06, 13 8:40 pm

double post ,...how did that happen,...

Stu · Post by **Stu** » Tue Aug 06, 13 10:32 pm

Pretty sure I have one, but not sure if I can lay my hands on it quickly. Bits everywhere! Will try and have a look at the weekend.

latil · Post by **latil** » Tue Aug 06, 13 11:36 pm

Stu wrote:Pretty sure I have one, but not sure if I can lay my hands on it quickly. Bits everywhere! Will try and have a look at the weekend.

I think you had my one a while back?

Stu · Post by **Stu** » Wed Aug 07, 13 12:55 am

Deffo had your lines, Mate. They got used!

Wasn't sure where the adaptor came from, had a funny feeling it came from Robbo, as it happens. :-S

Anyhow, if I've still got it, it needs a deserving home! :-D

Kev · Post by **Kev** » Wed Aug 07, 13 2:08 am

http://www.ebay.com.au/itm/CHRYSLER-SMA ... 1025566286

VGVIP · Post by **VGVIP** » Thu Aug 08, 13 6:04 am

Hi Pete.
I do have a spare one if Terry can not find his.
let me know if you need it.
Steve

aussie pete · Post by **aussie pete** » Fri Aug 09, 13 8:45 pm

Hi steve,i need one of these like ,..yesterday, I would like to relieve you of the one you have ( I will pm you). thanks to everyone that spent the time to make an offer.
those billet ally ones look great but I can`t wait for them to be delivered

Minty · Post by **Minty** » Fri Aug 09, 13 8:53 pm

Its not here,found pipes and top filter housing,maybe at my parents house,cant get down there till next week,think steve will have to help you,if i find it ill keep it safe for the future