64 Plymouth Belvedere post car
Moderator: Moderators
Re: 64 Plymouth Belvedere post car
Looks great Pete.
Who did you use for upholstering?
Who did you use for upholstering?
- ScottyDave
- Posts: 1619
- Joined: Sun Mar 08, 15 9:38 pm
- Location: Dave Evans: MMA 130, Worcestershire
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
thanks for the kind words ,this photo is the one i sent to the trimmers ..Luckily i had the door cards that came with the car or this would have never happened ...the post car door cards are almost unobtainable and the tops are highly sort after as they are longer than the other types ...... one of the pictures i sent the trimmer which is of a 1964 Hemi lightweight
- Attachments
-
- Screen-Shot-2013-05-21-at-12.48.32-PM.jpg (74.95 KiB) Viewed 1178 times
Jesus saves but satan does that thing with his tongue you like
Re: 64 Plymouth Belvedere post car
Wow just wow.
Are we there yet dad ..... 10 to the gallon but worth it.
MMA Public Relations Officer.
MMA South London and Surrey Area Rep.
MMA Public Relations Officer.
MMA South London and Surrey Area Rep.
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
CW TRIMMING,, Henfield just outside Brighton ....I think he done a great job considering it was just from pictures...
Jesus saves but satan does that thing with his tongue you like
- Stu
- Posts: 6924
- Joined: Sun Jul 31, 05 4:15 pm
- Location: Shropshire, home of the worlds smallest big screen TV
Re: 64 Plymouth Belvedere post car
Looking great.
24 hours in a day, 24 beers in a case. Coincidence? I think not…
70 Challenger
MMA/489
NSS/435
70 Challenger
MMA/489
NSS/435
Re: 64 Plymouth Belvedere post car
Looking very good in RED
and yes a very good job
and yes a very good job
Re: 64 Plymouth Belvedere post car
You've almost got as much red as Blue has blue.
Looks fantastic Pete.
Looks fantastic Pete.
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
I decided at the last minute not to stick the carpets down for maintenance..The main cables from the trunk run in the corner of the floors and if it was glued it’s a new carpet ..Parcel shelf needs doing and I am thinking of the best way of doing it with the cage ..Apart from a few bits of trim and a good hoover it’s all but done inside
- Attachments
-
- IMG_2707.jpeg (207.81 KiB) Viewed 1001 times
-
- IMG_2706.jpeg (175.08 KiB) Viewed 1001 times
Jesus saves but satan does that thing with his tongue you like
- Dave Napier
- Posts: 50
- Joined: Tue Oct 24, 23 2:33 pm
Re: 64 Plymouth Belvedere post car
Looks fantastic Pete. I made some door cards for the van out of some hardboard and some sparkly purple vinyl, should be easy enough to get some red
'74 Challenger..9.46 @ 145.9 1/4, 6.001 @ 118 1/8 so far. 4023lb !!! # N/A, Marsh performance 655ci, Indy Maxx, T/R, Indy 600-13 X's, Street legal, pump gas, full interior, Cal-Tracs, mufflers, 4.10's and real 10.5 radials.
9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with the old mule 580 wedge.
RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
9.51 @ 142.4 1/4, 6.003 @ 114 1/8 with the old mule 580 wedge.
RHD '68 Barracuda Fastback 323ci street/strip. Best ET 13.88 @ 99.03
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
Another day in the garage moving the axle back this time .I should be able to run a 30 inch slick but I have had no room at the front of the slick .So after lots of googling I think my problem was a 20” front section monoleaf on a stock size front spring hanger .So I ordered a longer front hanger to move the axle back .Also my rear spring hangers were facing forward which I have learnt is a no no ..
- Attachments
-
- IMG_2662.jpeg (96.46 KiB) Viewed 923 times
Last edited by pete walton on Sat Mar 02, 24 4:18 pm, edited 2 times in total.
Jesus saves but satan does that thing with his tongue you like
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
Marc Sheridan drilled the new hangers perfectly and it all seems bang on with the rear hangers hanging straight ..As with all these stories there is a negative rear flexible brake line is like a guitar string and the propshaft is to short but this I knew would happen ..Now we can order new slicks and move forward again ..we seemed to be back to sideways photos which I am sorry for ..
- Attachments
-
- IMG_2722.jpeg (174.89 KiB) Viewed 920 times
-
- IMG_2723.jpeg (152.82 KiB) Viewed 920 times
-
- IMG_2726.jpeg (159.23 KiB) Viewed 920 times
-
- IMG_2725.jpeg (150.14 KiB) Viewed 920 times
Last edited by pete walton on Sat Mar 02, 24 4:23 pm, edited 2 times in total.
Jesus saves but satan does that thing with his tongue you like
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
i should wear my glasses more than i do,,,sorry for random posts
Last edited by pete walton on Sat Mar 02, 24 4:21 pm, edited 1 time in total.
Jesus saves but satan does that thing with his tongue you like
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
Jesus saves but satan does that thing with his tongue you like
- pete walton
- Posts: 1384
- Joined: Mon Jan 16, 12 4:18 pm
Re: 64 Plymouth Belvedere post car
not sure what i have done here ,,,,computer Bananarama!
Jesus saves but satan does that thing with his tongue you like